Table of Contents
Advertisement
17 .5.00
Anhang.fm
Gigaset3035isdn
Appendix
Press the keys in the
specified order
Restoring factory settings
You can withdraw your settings using the following menu
options
Operational or
Reset all.
Call the menu.
Select and confirm.
Enter the base PIN (factory setting 0000) and confirm.
To restore operational status:
All MSNs are deleted (see page 97).
All subscribers (base station telephone/handsets) are
unrestricted (see page 99).
AM PIN is reset to 0000 (see page 122).
The ringer volume is reset (see page 69).
The access code (exchange code) is deleted (see
page 136).
The accounts are deactivated (see page 54).
Call restrictions are switched off (see page 87).
Remote operation is switched off (see page 123).
or
Reset all:
In addition:
or
All PINs are reset to 0000 (see page 55, page 82).
Directory (see page 35), caller list (see page 33), pro-
vider entries (see page 58) and short cut entries (see
page 76) are deleted.
User-defined emergency numbers (see page 85) and
hot key numbers (see page 82) are deleted.
Call charge settings are deleted (see page 48).
User's own announcements are deleted
(see page 105).
#
$
and
The phone is in standby.
®
Any previously set external call forwarding remains
active. The call forwarding message will appear af-
ter the MSN is entered. Handsets always remain
registered.
140
A31008-G3035-B101-6-7619 Korrektur: 0
17 .5.00
Anhang.fm
Gigaset3035isdn
Press the keys in the
specified order
Accessories
Activating setting for operation with repeater
A repeater will extend the range of the handsets connect-
ed to a base station telephone.
The following settings must be made when you register a
repeater at the base station telephone. They guarantee
that the base station telephone and repeater work togeth-
er for optimum performance.
Call the menu.
Select and confirm.
The display is highlighted when the function is active.
#
$
and
The phone is in standby.
®
To register the repeater, you must first prepare the
base station telephone for registration (see
page 91).
Registering a cordless telephone terminal
box (TAE)
The cordless TAE connector enables you to use terminals
(device types) such as phones, answering machines (with
analog network connection), fax machines (group 2/3) or
modems without cords in the vicinity of the base station
telephone.
The procedure for registering the TAE is similar to that for
a handset. For more information, consult the operating in-
structions for the TAE.
Because analog fax machines and modems do not trans-
mit a service ID, it is possible, for example, that incoming
fax calls may not be recognised and thus could be misdi-
rected. This is why is it recommended that a separate call
number (MSN) should be used for your fax machine/mo-
dem and that the device type should be set as 'neutral" .
A31008-G3035-B101-6-7619 Korrektur: 0
Appendix
141
Advertisement
Table of Contents
