Siemens Gigaset 3035isdn Operating Instructions Manual page 74

17 .5.00 rat.fm Gigaset3035isdn
About your system
Symptom Possible Cause
When call forwarding Internal forwarding is
is active, the forward- active.
ing conditions are not
displayed.
The telephone rings The call number is in
when there are fax PC the call number list of
calls. the base station tele-
phone.
The telephone always Hot key selection is ac-
dials the same num- tive.
ber.
Your calling partner The microphone is
cannot hear you. switched to "mute" .
There is no display. The power supply unit
is not connected cor-
rectly.
The display does not The call costs display is
show any call costs. not active or the feature
has not been enabled
by the network provid-
er.
You have no access to The answering machine
the answering ma- lock is active.
chine.
You can't record new in- There remainingrecord-
formation or an- ing time is insufficient.
nouncements.
For telephone sys- The prefix was not en-
tems: tered or was entered in-
After dialing a call num- correctly.
ber, no number or an in-
correct number is
reached.
The handset does not Ringer melody settings. Set ringer melody(inter-
ring as set.
Cannot make calls with It is not registerd at the
the handset. base station telephone.
No access to answer- Handset not assigned
ing machine from to the receive MSN of
handset. the answering machine.
130
A31008-G3035-B101-6-7619 Korrektur: 0
Solution
Activate "external" for-
warding, see page 44.
Request enabling from
network provider.
Delete the relevant call
number (MSN) from the
list, see page 88.
Deactivate hot key sele-
cion, see page 84.
Press the Mute key to
activate the micro-
phone, see page 28.
Check the connector on
the base station tele-
phone and the socket.
Activate the call costs
display, see page 52.
Request the "call charg-
es" service from your
network provider.
Enter the answering
machine PIN, see
page 104.
Delete old messages/
information, see
page 113.
Set the quality of the re-
cordings, see page 117.
Check and authorise
the prefix, see
page 136.
nal), see page 69.
Change ringer melody,
see page 90.
Log on handset, see
page 91.
Check assignment, see
page 98.
17 .5.00 rat.fm Gigaset3035isdn
Symptom Possible Cause
Some of the ISDN Feature not enabled?
functions do not work
as they should.
Another telephone on Both telephones have
the S bus does not been assigned the
0
ring. same MSN. One of the
telephones also has in-
ternal forwarding ac-
tive.
User is prompted to en- Activated call forward-
ter PIN when forward- ing to answering ma-
ing to the answering chine in the network
machine in the network (T-Net box).
(T-Net box).
A31008-G3035-B101-6-7619 Korrektur: 0
About your system
Solution
Inform your network
provider.
Deactivate internal
forwarding or set
external forwarding,
see page 44.
Deactivate call forward-
ing; activate call for-
warding at T-Net box.
131