Table of Contents
Advertisement
OPENING THE HOOD
OPENING THE HOOD
Model 3 does not have a traditional internal combustion engine. Therefore, the area that would normally house the engine is used as
additional storage space. Tesla calls this area the "Front Trunk".
To open the hood with 12 volt power enabled, touch the associated OPEN button on the touchscreen.
To open the hood without 12 volt power:
1. Locate an external 12 volt power supply.
2. Release the tow eye cover by pressing firmly on the top right perimeter of the cover until it pivots inward, then pulling the raised
section toward you.
28
Advertisement
Table of Contents
