Omron V700-HMC71 Operation Manual page 21

(10) Test
The Test command is to conduct transmission tests on the transmission to the
User board. When the R/W Module receives this command, it transmits the
same command to the User board.
n Command
Command
"1" "0"
(Data 1)
n Response
Completion Test Data (Same data as the command)
code
"0" "0" (Data 1)
Test Data
⋅ ⋅ ⋅
(Data n)
⋅ ⋅ ⋅
(Data n)
(21/23)
Terminator
Cr
Terminator
Cr