At+Cops - Operator Selection; At+Cops? - Display Current Network Operator - Siemens M1 User Manual

Technical reference section
Example:
Enter:
GSM module:

AT+COPS - Operator selection

These commands allow you to read out the current network operator, display a list of
available network operators or select a operator directly. Various command extensions
are available.
Command
AT+COPS?
AT+COPS=?
AT+COPS=<mode n>,
<format f>,
<network operator>

AT+COPS? - Display current network operator

This command displays the network operator that is currently selected. It also provides
you with information on whether the radio modem has selected this network operator
automatically or whether you manually instructed it to select this operator.
A result code with the following format is returned in response to the AT+COPS? com-
mand:
AT+COPS?
Command
Result code
36
AT+CREG?
+CREG: 0,0 => not registered
OK
AT+COPS
Result
Displays current network operator.
Displays a list of network operators that are currently
available via radio.
Allows you to instruct the GSM module to use a spe-
cific network operator.
AT+COPS?
+COPS: <mode n>, <format f>, <operator>