Installing The Tcp/Ip Protocol - Gigaset SE505 Owner's Manual

Installing the TCP/IP protocol.

The TCP/IP protocol ensures that the PC's in the network can communicate with each
other. You must first install this
connection to the Gigaset SE505 dsl/cable.
In the Network window move from the Identification tab to the Configuration tab.
N
In the Network window, check that there is a TCP/IP -> entry for your network card
N
or network adapter in the list of components. If you are using a Gigaset PCI Card 54
as the wireless network adapter for example, then there must be an entry called
TCP/IP -> Siemens Gigaset PCI Card 54.
If the entry does not exist, click on Add.
N
Select Protocol as the network component type and click on Add.
N
In Manufacturers select Microsoft and in Network Protocols select TCP/IP before
N
confirming with OK.
Protocol for the network adapter that establishes the
Configuring the local network
21