Saving Settings - Siemens gigaset SE551 Owner's Manual

Please remember:
If you activate MAC access control, you must at least enter the PC from which you
are configuring the Gigaset SE551 WLAN dsl/cable. Otherwise you will no longer
be able to access the user interface and a corresponding error message will be
shown.
If, by mistake, you have denied all PCs access to the Gigaset SE551 WLAN dsl/cable
you have two choices:
u
You can completely reset the Gigaset SE551 WLAN dsl/cable (see page 17).
u
You can connect a PC to the Gigaset SE551 WLAN dsl/cable using one of the
LAN connections (by cable). As MAC access control only applies to PCs that are
connected "wirelessly", you can use this PC to change the configuration.
ì
To go to the next step, click on Next >.

Saving settings

On the next screen you conclude the wizard and save the settings. You will be informed
of any security risks that still exist.
ì
Click on Finish to conclude the wizard.
The settings will now be active on your Gigaset SE551 WLAN dsl/cable.
Please remember:
You must now configure WEP or WPA key for your PC's wireless network adapter, if this
has been configured with other values. Once you have done this you can log in to your
Gigaset SE551 WLAN dsl/cable wirelessly again.
Security settings
69