TC65 JAVA User's Guide
Strictly confidential / Released
4.4.1.5
State 5: Java Application Active, General Purpose I/O and I2C
The Java application is active, ASC1 is used as System.out and the Java instance of the RS-
232 serial interface is connected to ASC0. The Java application is activated with at^sjra. The
I/O pins are configured with
command details.
Java access to serial
System.out
interface (CommConnection)
ASC 0
ASC 1
4.4.1.6
State 6: Java Application Active, General Purpose I/O and SPI
The Java application is running, ASC0 is used as System.out and the Java instance of the
RS-232 serial interface is connected to ASC1. The Java application is activated with at^sjra
(refer to the AT Command Set [3]).
Java access to serial
System.out
interface (CommConnection)
ASC 0
ASC 1
TC65 JAVA User's Guide_V05
at^scpin
or at^sspi. Refer to the AT Command Set [3] for AT
AT parser 0
AT parser
with CSD
without CSD
Java AT command API
Java AT command API
with CSD
without CSD
Figure 8: Module State 5
AT parser 0
AT parser
with CSD
without CSD
Java AT command API
Java AT command API
with CSD
without CSD
Figure 9: Module State 6
Page 22 of 90
s
AT parser
without CSD
Java AT command API
up to 10 GPIO pins:
without CSD
AT parser
without CSD
Java AT command API
up to 10 GPIO pins
without CSD
I2C:
SPI
26.09.2005