Manual Registration - Siemens Gigaset 4015 Operating Instructions Manual

Gigaset 4015 Classic, GBR, A31008-G4015-B101-1-7619
Registering and de-registering handsets
Press keys:
REGISTER HS
42

Manual registration

Gigaset 4000 handsets at the Gigaset
4010/4015 base station
If a handset has already been registered at a different
base station, you must now register it at your base
station. The Gigaset 4000 Classic handset cannot be
registered at more than one Gigaset 4010/4015 Classic
base station at one time.
Step 1:
Open the menu.
MENU
Select the menu item and confirm,
displayed.

Enter the 4-digit system PIN (factory setting: 0000) and
confirm.
After entering the system PIN,
in the display.
Step 2:
Hold down the key underneath the base. A signal tone
is generated at the base station. The next unassigned
internal number (1 – 6) is automatically assigned to the
handset.
If all numbers are assigned, the internal number 6 is
re-assigned. The handset which was registered under
number 6 is then deregistered.
After about a minute the internal number of the hand-
set is shown in the left-hand corner of the display
(e.g. "2").
mobilt_an.fm 17 .09.01
is
PIN ****
REGISTER HS
flashes