Spare Parts; Orders For Spare Parts - Siemens 1PH728 Operating Instructions Manual

Spare parts

8.1

Orders for spare parts

Ordering data
Please state the following when ordering spare parts:
● Precise designation of the spare part,
● Machine type,
● Serial number of the motor.
The part designation should be identical to the designation stated in the list of spare parts
and specified together with the appropriate spare part number.
Example:
End shield, drive end (part 5.00)
For type 1PH7..., No. N - 1234567000010.
Replacing rolling-contact bearings
When replacing rolling-contact bearings, in addition to the bearing identification code, the
replacement code for the bearing version is also required. Both of these codes are specified
on the lubricant plate and in the motor documentation, or on the installed bearing.
Using commercially available spare parts
Commercially available, standard components can be used, but ensure that they have the
same construction type, dimensions, strength class etc.
[ID: 380.02]
A5E00177602A AD
Siemens AG Operating Instructions 2.02 1PH728
Siemens Hardware
The motor type and serial number can be found on the nameplate. The serial number is
also stamped on the end face of the shaft end on the drive end.
8
67