Faults
6.1 Fault diagnosis table
Table 6-2
Diagnosis table for electrical faults
Overview of electrical faults
Electrical fault characteristics
- Motor will not start up
- Motor starts up slowly
- Drumming noise during startup
- Drumming noise during operation
- Drumming noise in time with twice slip frequency
- High temperature rise at no load
- High temperature rise under load
- High temperature rise of individual winding sections
Apart from eliminating the cause of the fault (as described under "Remedial measures"), you must also rectify any damage
the motor may have suffered.
Take into account possible changes due to a rise in temperature.
[ID: 352.01]
48
Note:
If electrical faults occur, please refer to the manual
for the frequency converter.
Siemens AG Operating Instructions 2.02 1PH728
A5E00177602A AD