Setting User Access Rights - Gigaset 2060isdn User Manual

I_KAP03.FM5
8.12.98
. t Service
t Enable ring
t Phone No. list
t New entry
t Delete phone No
Deactivating unwanted calls blocking
. t Set sys funct.

Setting user access rights

t means: browse with u
Gigaset 2060isdn, Inland:
Ž
The comfort mobile unit is idle.
t
Meaning: see footnote
t Sel. call enable
This is the menu for blocking unwanted calls. The options
at your disposal are as follows:
Activate/deactivate unwanted call blocking.
All incoming calls are blocked if you do not define a num-
ber.
Check/change phone numbers for wanted calls.
Add new phone number for wanted calls.
Delete individual phone number as origin of wanted calls.
You do not have to go through the Service menu in order
to deactivate unwanted calls blocking.
c
Press the off-hook key
t Sel. call enable
u
Press this key to deactivate unwanted calls blocking.
OFF
By defining access rights for each registered mobile unit
you determine which internal users can place external,
charged calls.
All devices have unrestricted trunk access by default.
1. Unrestricted trunk access (= default)
The device can be used to conduct incoming and
outgoing external calls.
2. Incoming-only access
The device can be used only to answer incoming
calls. All external dialing options are disabled.
3. Internal-only access
The device can be used only to conduct internal
calls. All external dialing options are disabled. You can
conduct a consultation call with a user with internal-
only authorization, but you cannot transfer the call to
this user. You will be recalled if you attempt to do so.
t
Meaning: see footnote
or u
Z
press x
and
to confirm
NEXT OK
A30853-X210-B101-1-19
Locks
51