Registering The Gigaset 2000C Comfort Mobile Unit - Gigaset 2060isdn User Manual

I_KAP01.FM5
8.12.98

Registering the Gigaset 2000C comfort mobile unit

Initial registration
x
OK
Gigaset 2060isdn, Inland:
A mobile unit has to be ready for operation before you can
use it with a base station. See the section entitled "Instal-
lation" in the User Guide supplied with your Gigaset
2000C.
Each mobile unit has to be registered at the base station.
The registration procedure for the Gigaset 1000C is de-
scribed on the next page.
The following prompt is displayed if the mobile unit is not
registered at a base station:
x
(( Press to confirm. Enter the 4-digit system code of the
o
OK
base station and confirm this entry as well (default code:
"0000"). The mobile unit searches for the base station
waiting to accept registration. The message "Registering
with Station 1" appears on the display.
Press the Register button on the base station
Use a pointed instrument (such as a pencil or ball-point
pen) to press the button. The Register button starts flash-
ing.
The unassigned internal numbers are listed as soon as
the connection between the base station and mobile unit
is established.
1 ... 8
Key in the internal number you want to assign to the mo-
bile unit. Use
x
Confirm your choice of internal number. This concludes
OK
the registration procedure and a message to this effect
appears in the display, for example "Unit registered with
internal No. 1" .
Your mobile unit is registered and ready for use.
Register?
OK
Register button
X
to correct your entry if necessary.
A30853-X210-B101-1-19
Installation
11