Siemens SX66 User Manual page 55

Converting writing into text:
1. On the writing note, tap
the menu bar.
2. If you want to convert only certain words, select them
before tapping
and hold the selected words and then tap
on the pop up menu).
If a word is not recognized, it will be left as writing. And if the
conversion is incorrect, you can select different words from
a list of alternates, or return to the original writing.
Tap and hold the incorrect word (tap one word at a time),
then tap Alternates
list of alternate words appears. Tap the word you want to
use, or tap the writing at the top of the menu to return to
the original writing.
Tips for good recognition:
1. Write neatly.
2. Write on the lines and draw descanters below the line.
Write the cross of the "t" and apostrophes below the top
line so that they are not confused with the word above.
Write periods and commas above the bottom line.
3. For better recognition, use a zoom level of 150% or
higher by tapping
level.
4. Write the letters of a word closely and leave big gaps
between words so that the device can easily tell where
words begin and end.
5. Hyphenated words, foreign words that use special
characters such as accents, and some punctuation
cannot be converted.
If you edit or add to a word after attempting to recognize it,
the new writing will not be included if you attempt to recog-
nize it again.
Tools and
Recognize on the
from the pop-up menu. A menu with a
Tools > Zoom
Recognize from
Tools menu (or tap
Recognize
to change the zoom
SX66 User Manual
The writing is
converted into
typed text
55