Siemens SX66 User Manual page 118

118
SX66 Phone User Manual
Settings on your SX66 Phone
You need to complete these actions before you start using the
SX66 Phone:
n
n
n
n
1. Tap the
2. Select the
3. Make sure that you have connected your device with a serial sync cable if you choose
Now you can start to dial the new dial-up connection you have created by tapping
Settings >
Connecting via USB Port
As with the connection via
start using the
n
n
n
n
Before setting up an
and USBModem_Dialer, on the
into the CD-Rom of your PC and perform the settings as follows:
1. Tap the
2. Select the
3. Tap the
4. A
A GPRS SIM card is inserted in your SX66 Phone.
Disable the ActiveSync
Disable the Infrared function by tapping the
tab > Beam. Uncheck Receive all incoming
Insert your SX66 Phone to your PC/Notebook by
serial sync cable).
Start menu > Programs > Wireless
Serial connection type from the drop-down list and insert the synchronization
cable adapter.
Serial connection to a notebook or PC, tap
the Control Panel > Network and Dial-up Connections
serial
Wireless Modem
A GPRS SIM card is inserted in your SX66 Phone.
Disable the ActiveSync
Disable the Infrared function by tapping the
tab > Beam, and then uncheck
Insert your SX66 Phone to your PC
cradle).
USB modem, you must verify that you have the two files,
Start menu > Programs > Wireless
USB connection type from the drop-down list and insert the
adapter.
Start button on the
Found New Hardware
com port connection of your PC.
Start
beams.
Modem.
Start.
or IrDA, you need to check the following below before you
on your SX66 Phone via
com port connection of your PC.
Start
Receive all incoming
USB connection
SX66 Phone Companion
Modem.
Wireless Modem screen of your SX66 Phone.
message will pop up on your desktop PC.
Wireless Modem
menu > Settings > the
Serial connection (using the optional
on your PC.
USB connection:
menu > Settings > the
beams.
(using the USB
CD. Insert the Companion CD
on your
Connections
Start >
Connections
sync cable or
USBMDM
USB cable