Network Cards Settings - Siemens SX66 User Manual

102
SX66 Phone User Manual
2. Tap the
Activating LEAP
The LEAP (Lightweight Extensible Authentication Protocol) section of the application allows
you to increase the security of your device by setting the SSID, username, password, and
domain to ensure that no one can access your network without your permission. Most 802.11
access points offer by default a form of authentication called open systems authentication,
which is this device's default setting. In this mode, the access point grants approval for any
request for authentication. The client simply sends an authentication request frame, and the
access point responds with an authentication approval. This lets anyone having the correct
SSID to associate with the access point. For LEAP to work correctly, both the access point
and the receiving device (your SX66 Phone) must be set with the same username and
password, and SSID.

6.7 Network Cards Settings

A wireless network can be added either when the network is automatically detected as
described above or manually by entering the necessary setting information on the
Cards.
To manually add a new wireless network:
1. While the
2. On the
n
n
3. On the
n
n
n
4. On the
Settings tab, select the
2,3,4, or 5 minutes intervals.
WiFi is powered on, tap the
Network Cards icon > the
General tab, enter a network name (SSID). If a network was detected in
SSID is automatically entered and cannot be changed.
Select where your network connects to
Tap the This is a device-to-computer (ad-hoc) connection
connect to an ad-hoc connection.
Network Key tab if authentication information is needed, select the type of network
authentication to use. To determine whether authentication information is needed, check
with your network administrator.
To set authentication, choose the desired type from the
To use data encryption, choose the desired type from the
TKIP
By default, is enabled.
Enter the network key in the
automatically, tap The Key is provided for me automatically
N802.1x
tab, tap the Use IEEE 802.1x network access control for increased security.
Auto turn off WiFi if not connected
Start menu > Setting >
Wireless tab > Add New.
(The Internet
Network Key: box. If a network key is provided by your network
box, choose between
the Connections
or Work) in the Connects to:
checkbox if you want to
Authentication drop down list.
Data Encryption drop down list.
checkbox.
Network
tab > the
Step 1, the
box.