Siemens SX66 User Manual page 114

114
SX66 Phone User Manual
4. Follow the
5. Under
Connecting to a remote PC
Dial-up Networking (DUN)
Once connected, you can browse the Internet or check your E-mail. The remote
device that will provide the
system (either a hard-wired or mobile connection). Devices that might provide the
Networking
n Bluetooth-enabled
n Bluetooth-enabled
n Bluetooth
The remote computer to which you are connecting must also be attached to the phone
system and capable of answering a call.
Using Dial-up Networking:
1. From the
2. Tap
3. Follow the connection wizard instructions.
4. Tap
5. Enter a name for the connection in the
6. Enter a phone number. You may need to enter the country code and area code, depending
7. Tap
To make this connection the default dial-up connection for
using Bluetooth
1. From the
2. Tap the
3. Enable
your PC is the same as the
Bluetooth Browser
Next.
Serial Port Selection, select the name of the serial port for the PC selected above,
tap Next, and Finish.
allows you to connect to a remote computer via a phone line.
Dial-up Networking
service include:
cellular telephones.
desktop computers that are attached to a telephone system.
modems.
Today screen
New > Connect to a network >
After you create the Dial-up Networking
icon in the My Shortcuts
New Connection >
on where you are calling.
OK to begin dialing.
modem, you still need to complete the following steps:
Today screen, tap the
Connections icon
Bluetooth Settings
COM port setting used for
screen, select the PC you want to synchronize with, tap
service must have access to a telephone
> the Bluetooth icon > Bluetooth
Next.
shortcut with a device, tap and hold the shortcut
tab of the Bluetooth Manager, and tap Connect.
OK.
Connection Name
Start menu > Settings >
> the Advanced tab > Select
from the drop-down list.
Bluetooth on your PC.
Manager.
field.
Pocket Internet Explorer
the Connections tab.
Networks.
Bluetooth
Dial-up
when