Table of Contents
Advertisement
• If necessary, use the battery
3
cover
.
• Finally, close the cover again.
• Before removing the
RS MultiMediaCard™, carry out
the
Eject card
options menu. This pre-
My stuff
vents any data from being lost.
• To remove the
RS MultiMediaCard™, open the
cover and press the card briefly (if
necessary, use the battery cover).
The card will pop out a little and
you can remove it. To finish, close
the cover again.
3
function in the
Getting started
Charging the battery
Charging procedure
The battery is not fully charged
when delivered. Plug the charger ca-
ble into the bottom of the phone,
plug the power supply unit into a
mains power socket and charge for
at least two hours.
Display during charging
Y
Charging time
A flat battery is fully charged after
about 2 hours. Charging is only pos-
sible within a temperature range of
+5 °C to 45 °C. If the temperature ris-
es/falls 5 °C above/below this, the
charge symbol flashes a warning.
The mains voltage specified on the
power supply unit must not be
exceeded.
11
Advertisement
Table of Contents
