Page 1 Issued by Information and Communication mobile Haidenauplatz 1 D-81667 Munich © Siemens AG 2004 All rights reserved. Subject to availability. Rights of modification reserved. Siemens Aktiengesellschaft www.siemens-mobile.com obile Designed for life CX70 CXT70 CXV70...
Page 2: Table Of Contents
Safety precautions ... 3 Telephone list (schematic) ... 5 Display symbols ... 7 Getting started ... 9 Inserting the SIM card/ battery ... 9 Charging the battery ... 10 Changing CLIPIt™ covers ... 11 Switching phone on and off/ entering PIN ... 12 Enter PIN ...
Page 3 Voice message/mailbox ... 68 CB services ... 69 Surf & fun ... 70 Internet ... 70 Bookmarks ... 72 Emoty ... 72 Games and Applications ... 73 Downl. assist..73 Setup ... 75 Profiles ... 75 Themes ... 77 Dynamic light ...
Page 4: Safety Precautions
Otherwise you risk serious permanent damage to your hearing. Only use original Siemens bat- teries (100 % mercury-free) and charging devices. Otherwise you risk serious damage to health and property. The battery could explode, for instance.
Page 5 The phone may cause interfer- ence in the vicinity of TV sets, radios and PCs. Use only Siemens original ac- cessories. This will avoid poten- tial risks to health or property and ensure compliance with all relevant regulations.
Page 6: Telephone List (Schematic)
Telephone list (schematic) Call key Dial phone number/name displayed/ highlighted, take calls. Show last phone numbers dialled in standby mode. On/Off/End key • Switched off: Press and hold to switch on. • During a conversation or in an appli- cation: press briefly to finish. •...
Page 7 Integrated antenna Do not obstruct the phone above the battery cover unnecessarily. This reduces the signal quality. LED for Dynamic Light (p. 78) Loudspeaker Display Infrared interface (IrDA) Input keys Ringtone • Press and hold in standby mode: Switch all audible signals on/off (except alarm).
Page 8: Display Symbols
Display symbols Display symbols (selection) Signal strength Charging Battery charge level, e.g. 50 % Phonebook Records Surf & fun Service supplier portal Organiser Messages Camera Extras File management Settings All calls are diverted Ç Ringing tone off ¿ Short ring (beep) only ¾...
Page 9 Message symbols (selection) Unread Read Draft Sent MMS not sent MMS received MMS read MMS with DRM contents (p. 13) E-mail forwarded E-mail with attachment Voice mail received À Camera symbols Switches between Ñ Ò photo and video Brightness Ù Zoom factor Ú...
Page 10: Getting Started
Getting started Inserting the SIM card/ battery The service provider supplies you with a SIM card on which all the important data for your line is stored. If the SIM card has been delivered in credit-card size, snap the smaller segment out and remove any rough edges.
Page 11: Charging The Battery
Charging the battery Charging the battery The battery is not fully charged when delivered. Plug charger cable into the bottom of the phone, plug power supply unit into a mains power socket and charge for at least two hours. As an alternative, the battery can be charged via the USB port (see Accessories, p.
Page 12: Changing Clipit™ Covers
Changing CLIPIt™ covers You can use CLIPIt™ covers (accesso- ries) to adjust the appearance of your phone according to your per- sonal taste. Please switch the phone off before changing the keypad mat or face- plate. Dismantling the phone Remove battery cover (see p. 9). To remove the faceplate, insert the key into the opening, apply slight pressure...
Page 13: Switching Phone On And Off/Entering Pin
Switching phone on and off/entering PIN Switching phone on and Press and hold the On/ Off/End key. Enter PIN The SIM card can be protected with a 4 to 8-digit PIN. Enter the PIN using the number keys. The charac- ters **** ensure nobody can read...
Page 14: General Instructions
General instructions Standby mode The phone is in standby mode and is ready for use when the name of the service provider appears on the display. Press and hold the On/Off/ End key to return to standby mode from any situation.
Page 15: User Guide
User guide Menu controls The steps needed to reach a function are shown in a condensed form in the user guide, e. g. to display call list for missed calls in condensed form: ¢ ¢ Calls missed This comprises the following steps: Open the main menu.
Page 16: Standard Functions
Standard functions Option menus Functions which appear repeatedly in the options menu are listed here. Open menu. §Options§ Edit Open the entry to edit. View Display entry. Delete/ Delete entry/delete all Delete all entries after confirmation. New entry Create new entry. Send...
Page 17: Highlighting Mode
Highlighting mode With some applications (e.g. Phone- book/Addressbook) one or more entries in a list can be highlighted to carry out a function jointly. §Options§ Open menu. Activate highlighting Mark mode. If a non-highlighted entry is selected, this can be highlighted: The current entry is high- §Mark§...
Page 18: Security
Security The phone and SIM card are pro- tected against misuse by several security codes. Keep these confidential numbers in a safe place where you can access them again if required. Codes Protects your SIM card (per- sonal identification number). PIN2 This is needed to set the charge detail display and to access...
Page 19: Preventing Accidental Activation
Following the third unsuccessful attempt, access to the phone code and the functions that use it is denied. Contact the Siemens Service (p. 128). Clearing SIM card barring If the PIN is entered incorrectly three times, the SIM card is barred. Enter...
Page 20: Text Entry
Text entry Text entry without T9 Press number key repeatedly until the required letter appears. After a brief interval the cursor will advance. Example: Press once briefly to type the letter a, twice to type b etc. Press and hold to write the number.
Page 21: Input Menu
Input menu With text input: Press down: The input menu is displayed: Text format Input language Mark Copy/Insert Text entry with T9 "T9" deduces the correct word from the individual key entries by making comparisons with an extensive dic- tionary. Activate, deactivate T9 Open text menu.
Page 22 T9 word suggestions If several options are found in the dictionary for a key sequence (a word), the most probable is dis- played first. If the word you want has not been recognised, the next sug- gestion from T9 may be correct. The word must §highlighted§...
Page 23: Text Modules
Text modules Text modules can be stored in the phone for adding to your messages (SMS, MMS, e-mail). Write text modules ¢ ¢ Text modules Select §Options§ Write text module. Open menu and select §Options§ Save. Accept the specified name or allocate a new one.
Page 24: Calling
Calling Dialling with number keys The phone must be switched on (standby mode). Enter the number (always with prefix/international dialling code). A short press clears the last digit, a long press clears the entire phone number. Press the Call key. The dis- played phone number is dialled.
Page 25: If The Number Is Busy
If the number is busy If the called number is busy or can- not be reached because of network problems several options are availa- ble (depending on the service pro- vider). An incoming call or any other use of the phone interrupts these functions.
Page 26: Accept Call
Accept call The phone must be switched on. An incoming call will interrupt any other use of the phone. Press. Press. A phone number and the name of the caller transmitted by the net- work will be displayed if the number is saved in the Phonebook/Address- book.
Page 27 Incoming calls during a call You may need to register for this serv- ice with your service provider and set your phone accordingly (p. 84). Dur- ing a call, you may be advised that there is another call waiting. You will hear a special tone during the call.
Page 28: Call Options
Call options The following functions are only available during a call: Open menu. §Options§ Hold Maintain current call. Micro- If switched off, the person phone on on the other end of the line cannot hear you (muting). Also: Press and hold Handsfree Call via the loudspeaker.
Page 29 Tone sequences (DTMF) You can, for example, enter control codes (numbers) for remote access to an automatic answering machine while another connection exists. These entries are transmitted directly as DTMFcodes (control codes). Open menu. §Options§ Send DTMF Select. Using the Phonebook/ Addressbook Store phone numbers and control codes (DTMF codes) in the Phone-...
Page 30: My Phone
Where do I get what? You can purchase additional ring- tones, logos, animations and Java applications from your service pro- vider or directly from Siemens. Service supplier portal Depending on your service provider, you will find direct access to his por- tal on your telephone via menu items or bookmarks.
Page 31: Default Book
Default book ¢ ¢ Select function. Show entries The entries in the standard directory (Addressbook or Phonebook) are shown. Select a name with the first letter and/or scroll. New entry Create new entry. (see also p. 31) Addressbook (see also p. 35) Phonebook Default book You can set a particulary directory as...
Page 32: Addressbook
Addressbook The Addressbook can store up to 1000 entries, each with a variety of telephone and fax numbers as well as additional address details. These entries are managed separately from those in the Phonebook in the phone memory. However, you can exchange data between the Addressbook and the Phonebook on the SIM card.
Page 33: Display Options
§Save§ Additional information Temporary switch to Î Phonebook. Synchronisation The Siemens MPM (Mobile Phone Mana- ger, p. 123) makes it possible to manage the Addressbook using Windows Using Remote syncr. you can synchronise your mobile with an organiser stored on the Internet (see also p.
Page 34: Change Entry
Change entry Open Addressbook (in standby mode). Select required entry. Press. §Edit§ Select input field. Open entry. §Edit§ Make changes. Save. §Save§ Dialling an entry Open Addressbook (in standby mode). Select a name with the first letter and/or scroll. The number is dialled. If there are several numbers in the address book entry, these are offered for selection.
Page 35: Groups
Groups Nine groups are specified in your phone to enable you to arrange your Addressbook entries clearly. You can rename seven groups. Open Addressbook (in standby mode). Select (the number of <Groups> entries is listed behind the group name). Select group. Groups menu §Options§...
Page 36: Phonebook
Phonebook Entries in the Phonebook (on the SIM card) are managed separately from those in the Addressbook. You can, however, exchange data between the Phonebook and the Address- book. New entry If the Phonebook has been selected as standard: Open Addressbook (in standby mode).
Page 37: Call (Search For An Entry)
Call (search for an entry) Open Phonebook. Select a name with the first letter and/or scroll. Number is dialled. Call using record no. A record number is automatically assigned to every new entry in Phonebook. Enter record number. Press. Press. Change entry Select entry in Phonebook.
Page 38: Special Books
<Special books> Open Addressbook (in standby mode). <Special books> Select. <Own numbers> Enter "own" phone numbers in Phone- book (e.g., fax) for information. These numbers can be changed, deleted and also sent as an SMS message. <VIP numbers> Display the phone numbers saved in group.
Page 39: Call Records
Call records The phone number of a caller is dis- played if • the caller has switched off the Incognito function and • the network supports the "Caller Identity" function. Alternatively, a caller’s name is dis- played if it is stored in the Phone- book/Addressbook.
Page 40: Durat/Charges
Durat/charges You can display the charges and duration during a call. You can set a unit limitation for outgoing calls. ¢ ¢ Durat/charges Last call All outg. calls All incoming Remain. units Charge sett. Select. Open report or settings. Reset the selected report. §Reset§...
Page 41: Camera
Camera You can view photos/videos recorded on the integrated camera immediately, • use the photo as a background image, logo, a switch on/off animation or a screensaver. • send the photo/video via MMS or e-mail. Switch on ¢ Starts camera in standby mode.
Page 42: Video Mode
Image resolution A setting can be made for the quality of the image regardless of the pre- view image resolution. Premium: 640 × 480 (VGA) High: 320 × 240 (QVGA) Medium: 160 × 120 (QQVGA) Wallpaper: 132 × 176 The resolution may decrease depending on the selected digital zoom.
Page 43: Inbox
Inbox The central input folder offers imme- diate access to the messages cur- rently received. This means that you no longer have to look through all input folders for the various mes- sage types. The entries are marked with a symbol to indicate their type and status.
Page 44: Sms
You can transmit and receive very long messages (up to 760 charac- ters) on your phone. They are auto- matically composed of several "nor- mal" SMS messages (note higher charges). Additionally you can insert pictures and sounds in an SMS. Write/send ¢...
Page 45 Picture&sound Send the pictures and tones with or without accompanying text. Remember that these may be pro- tected (DRM, p. 13). The text input field is open: Open menu. §Options§ Select Picture&sound. The menu contains: Fix animations Fix sounds Own animat. Own pictures Own sounds Select area.
Page 46: Read
Read Arrival of a new SMS announced in the display. Open it with the display key beneath it (p. 42). Reading the SMS. Scroll through message line by line. ç SMS 01.10.2004 + 12398765431 Text of SMS . . . Delete Reply You can answer the SMS now open...
Page 47 Lists All SMS messages are archived in dif- ferent lists, according to their status. (List of message symbols, see p. 8): Inbox ¢ ¢ ¢ Inbox The list of received SMS messages is displayed. Draft ¢ ¢ ¢ Draft The list of not yet transmitted SMS messages is displayed.
Page 48: Setting
Setting SMS signature ¢ ¢ Message setup ¢ ¢ SMS signature You can enter a “signature” with a maximum of 16 characters. This sig- nature will then be attached to each SMS except and when changes §Reply§ are made to an existing SMS. SMS profiles ¢...
Page 49 More information on SMS SMS status report If the message cannot be transmit- ted to the service centre you are offered the chance to repeat the transmission. If this also fails, con- tact your service provider. The sage sent! message only indicates transmission to the service centre.
Page 50: Mms
The Multimedia Messaging Service enables you to send texts, pictures/ videos and sounds in a combined message to another mobile phone or to an e-mail address. All elements of an MMS message are merged to form a "slide show". Depending on your phone's settings, you will receive either the complete message automatically or notifica- tion that an MMS has been saved in...
Page 51 Open Display picture. Delete Delete inserted picture/video. Save Save picture/video for use later on. Msg. details Display properties, incl. any user right restrictions (p. 13). Sounds <Sound> Select. Display sound functions: Insert sound Open list to select a tone. Record Activate tone recording in order to record tones (p.
Page 52: Templates
Generation options Open menu. §Options§ Send MMS Send MMS. Play Play entire MMS on the display. Picture... See above p. 49. Sound... See above p. 50. Text... See above p. 50. Page page: Insert new page behind current one. Delete page: Delete cur- rent page.
Page 53: Sending An Mms
Sending an MMS The page(s) of the new MMS is (are) already created and the MMS is dis- played. Open address entry. ç MMS Subject: Greetings from London Send to: +1234567654321 | Size: 85 KB Þ ß á Enter a brief description. Subject: Enter one or more phone Send to:...
Page 54: Receiving An Mms
Sending options Open menu. §Options§ Send MMS Send MMS. Play Play entire MMS on the display. Edit Object selection to change an object. Add recipient from the cur- recipient rent address directory. Delete Delete individual recipient. recip. Add attachment: attachm. •...
Page 55: Reading An Mms
Reading an MMS An MMS has been fully received. Select the MMS. Start automatic playing of the MMS. Key functions for playback: To the next page. Press briefly once to return to the start of the current page; press briefly twice to return to the start of the previous page.
Page 56: Setting
If the setting has not yet been set, you will receive the necessary data from the service provider or via the "Setting Configu- rator" at (p. 125): www.siemens-mobile.com/ mobilescustomercare Activate profile Select profile. Open menu and select §Options§...
Page 57: User Settings
User settings Set the MMS dispatch to suit your requirements: Delivery Request delivery confirma- report: tion for sent messages. Read reply: Request confirmation that the MMS has been read. Default Send priority: priority: Normal, High, Validity: Select the period in which the service centre is to try to deliver the message: Manual,...
Page 58: E-Mail
E-mail Your phone has an e-mail program (client). You can use it to create and receive e-mails. Write ¢ ¢ Create new Enter the address data for the e-mail: Enter one or more Send to: E-mail address(es). Insert them from Ï...
Page 59: Receive/Read
Receive/read ¢ ¢ Inbox ¢ Select function. Before an e-mail can be read, it must be retrieved from the server. You have two options: Retr. e-mail Only the message header in (p. 42) is sent. You can then decide if you also want to receive the con- tents: §Options§...
Page 60: Setting
Before using this service you must set the server access and your e-mail parameters. You will receive the necessary data from the service pro- E-mail vider or via the "Setting Configura- tor" (p. 125) at: www.siemens-mobile.com/ mobilescustomercare Accounts Inbox (p. 42). Activating access Set access §Edit§...
Page 61 Account sett. Provider: Select provider. User name: Your name. E-mail Your e-mail address, e.g.: address:* name@domain.abc Reply Additional e-mail address address: for replies. User ID: * Your user ID. Password: * Your password. Downl. only Set maximum size for e-mails incoming e-mails.
Page 62: Inst. Message
Inst. message With this function you can transfer text, audio clips, pictures and files straight to and from one or more ter- minals (mobile phone, PC). This function is not offered by all service providers. Please ask your service provider about this. Your dialogue partners are entered in contact lists.
Page 63: Login
Login ¢ ¢ Inst. message Select the last access to be used (see also Automatic login: Contact lists When the connection has been established, the contact list or the list of the contact lists is shown for selection. In the contact list, you will find a list of the most recently used contacts.
Page 64 Managing the groups Select one of the groups you set up yourself. Open menu. §Options§ Manage Select. Manage group Different functions are offered depending on the selection: Add member Add a new group member, see also (p. 62). Search Search for group member. memb.
Page 65: Contact List Options
Creating a new contact list The current contact list is displayed. Open menu. §Options§ Contact lists Available contact lists are displayed. Open menu. §Options§ Select. Create Contact list ID: Give the contact list its own, specific name. Allocate self-explanatory Name: names.
Page 66: Start Chat
Start chat A contact list must be displayed. Select a contact or a group. Start communication with the contact. The page is displayed. During Inst. Message with a group, the name of the sender is placed in front of each contribution. Open editor.
Page 67: Msg. History
Options (group contact) Open menu. §Options§ Leave group Exit group. Details Information about the group: Group ID:, Name:, Topic:, Owner: Clear all Delete all texts in the cur- rent Inst. Message. Receiving objects You will be informed in the display if sounds or pictures are sent to you during a dialogue.
Page 68: All Contacts
My settings Information on your current per- sonal status: Alias: Your own alias by which you can be found on the server. AIM screen Name to be displayed in name: the group. Mood: Information about your own mood, e.g. Happy, Sad, Sleepy, etc. Status text: Random text information, e.g.
Page 69: Voice Message/Mailbox
Voice message/mailbox ¢ ¢ ¢ Setup Most service providers provide a mailbox in which a caller can leave a voice mail for you if • if your phone is switched off or not ready to receive, • if you do not want to answer, •...
Page 70: Cb Services
CB services ¢ ¢ Setup ¢ CB services Some service providers offer infor- mation services (info channels, Cell Broadcast). If reception is activated, your Topic list will supply you with messages on the activated topics. CB messages are displayed in standby mode, longer messages are scrolled automatically.
Page 71: Surf & Fun
• Bookmark site The current page is saved as a bookmark. Go to... Enter URL for direct dial to an Internet address, e.g. wap.siemens- mobile.com Reload Reload current page. Show URL Display the URL of the page currently loaded for sending via SMS/MMS/ e-mail.
Page 72: End Connection
End connection Press and hold to clear down the connection and close the browser. Navigation in the browser • Select a link. • Settings, status on/off. • Press briefly: back a page. • One input field/link forward/back. • Scroll one line. Display symbols in the browser (selection) Connect...
Page 73: Bookmarks
Set profile manually You will receive the necessary data from the service provider or via the "Setting Configurator" (p. 125) at: www.siemens-mobile.com/ mobilescustomercare Open menu. §Options§ Edit Start processing. For the Internet-specific settings below, please contact your service provider. Delete Delete selected profile.
Page 74: Games And Applications
Most applications include instructions. Some applications and games are already pre-installed on your telephone. You will find these listed here: www.siemens-mobile.com/cx70 Requirements WAP profile (p. 71) and the access (p. 90) must be configured. Download Select the correct access depending...
Page 75: Additional Information
Internet. Downloading or running applications will not affect or change the software already installed on your Java™-enabled mobile phone. Siemens excludes all warranty and liability claims in respect of or in connection with any applica- tions subsequently installed by the customer and any software not included in the original delivery package.
Page 76: Setup
Setup Profiles ¢ ¢ Profiles Several settings can be stored in a phone profile in order, for exam- ple, to adapt the phone to the sur- rounding level of noise. • Five standard profiles are provided with default settings. They can be changed however: Normal environment Quiet environment...
Page 77: Aircraft Mode
Rename Change personal profile (except default profiles). Car Kit If an original Siemens Car Kit is used, the profile is switched on automati- cally as soon as the phone is inserted into the cradle (see also accessories, p. 133).
Page 78: Themes
Themes ¢ ¢ Themes Load a completely new user inter- face in your telephone. With the press of a key, various functions are re-organised based on a topic, e.g. • switch on/off animation, • background image, • screensaver, • switch on/off melody, •...
Page 79: Dynamic Light
Dynamic light ¢ ¢ Dynamic light ¢ Select function. The LEDs beneath the top of the phone are used to optically signal various functions. Show effects Switch on function. Select You can set the optical signals for the following functions: Standby Net search d Calls...
Page 80: Display
Display ¢ ¢ Display ¢ Select function. Language Set the language of the display text. When "automatic" is set, the lan- guage of your home service provider is used. If a language that you do not under- stand happens to be set, the phone can be reset to the language of your home service provider with the fol- lowing input (in standby mode):...
Page 81: Own Greeting
Timeout Set period after which the screen- saver starts. Security To terminate the screensaver, the telephone code is requested. Auto key lock Automatic keypad locking if no key has been pressed for one minute in standby mode. Unlocking: Press and hold. Note The screensaver Digital clock...
Page 82: Ringtones
Ringtones ¢ ¢ Ringtones ¢ Select function. Set the tones on the telephone to suit your requirements. Ringer setting Activate/deactivate all On/off tones. Reduce ringtone to Beep a short signal (beep). Silent alert To avoid the disturbance caused by a ringing phone, you can activate the silent alert function as an alternative.
Page 83 Allocating a ringtone A ringtone which has already been selected will be played or the list of possible ringtones will be displayed for selection. Calls Allocate a single ringtone to all phone numbers in the Addressbook. Group calls Allocate a different ringtone to each group.
Page 84: Phone Pilot
Phone Pilot ¢ ¢ Phone Pilot ¢ Select function. Your accompanies you Phone Pilot with instructions for many actions you can perform with your phone. It reminds you of important deadlines or birthdays. is in the phone by Phone Pilot default and cannot be deleted.
Page 85: Call Setup
Call setup ¢ ¢ Call setup ¢ Select function. Hide ID When you make a call, your phone number can be displayed on the recipient's display (depending on the service providers). To suppress this display, you can enable the "Hide ID" mode for all sub- sequent calls or just for the next call.
Page 86: Minute Beep
All calls All calls are diverted. Icon in the top line of the display in standby mode. Ç Not reachable Divert occurs if phone is switched off or is out of range. No reply A call is only diverted after a delay that is determined by the network.
Page 87: Phone Setup
Phone setup ¢ ¢ Phone setup ¢ Select function. Key tones Set the type of acoustic key acknowledgement. Info tones Set service and alarm tones: Activate/deactivate tones. On/off Extended If switched on, a wider range of service tones is available, e.g.: end of menu reached, network connection interrupted.
Page 88: File System
File system Format (Phone-code protected) The telephone memory is formatted and all saved data such as ringtones, pictures, games, etc. is deleted. For- matting can last longer than one minute. Clean up Creating more memory by deleting temporary, non-required files. Master reset Reset phone to default values (fac- tory setting).
Page 89: Clock
Clock ¢ ¢ Clock ¢ Select function. Time/date The clock must be set correctly once at start-up. Press. §Change§ First enter the date (day/ month/year), then the time (hours/minutes/ seconds). Additional information If the battery is removed for longer than 30 seconds, the clock must be reset.
Page 90: Connectivity
Connectivity ¢ ¢ Connectivity ¢ Select function. GPRS (General Packet Radio Service) Switch GPRS on/off GPRS is a new method for transmit- ting data faster in the mobile net- work. Use GPRS and if the network has sufficient capacity, you can be connected to the Internet perma- nently.
Page 91: Data Services
• The access profiles must be configured manually. In this case, you will receive the necessary data from the service provider or via the "Setting Configurator" at (p. 125): www.siemens-mobile.com/ mobilescustomercare Select profile Select the profile. Confirm selection. Set profile Select the profile.
Page 92 If necessary, check with your service provider for details. You will find the current settings for the service pro- vider in the Internat at this address: www.siemens-mobile.com/ mobilescustomercare (p. 125). Make the settings. Authentication Activate or deactivate encrypted WAP dial-up (CSD connections only).
Page 93 Rec. voice/fax (Only if no special fax or data number is available). Start the required communication program on your PC and select the function on the phone during the call (the PC will take over the connection). End transmission End transmission with PC-software and/or press Rec fax/data Your service provider has given you...
Page 94: Security
Security ¢ ¢ Security ¢ Select function. Auto key lock If activated, the keypad is locked automatically if no key has been pressed for one minute in standby mode. This prevents the phone from being used accidentally. However, you can still be called and you can still make an emergency call.
Page 95 Barrings Barring restricts the use of your SIM card (not supported by all service providers). You need a 4-digit net- work password for network barring. Your service provider will give you this password. You may need to be registered separately for each barring.
Page 96: Network
Network ¢ ¢ Network ¢ Select function. Line This function is only displayed if it is supported by the service provider. Two separate phone numbers must be registered on the phone. Select line Select the currently used phone number. Display current phone number.
Page 97: Band Selection
Create/change entry: or select an existing entry, <Empty> then select a new service provider in the list and confirm. Record new service provider (last entry in the list): Furth.network Select, enter the provider data and save it. Additional information If you are outside your home network, your phone automatically dials another GSM network.
Page 98: Accessories
Headset Only in conjunction with an original Siemens headset (see accessories). If an original Siemens Headset is used the profile is automatically activated when the headset is plugged in. Auto answer (factory default: off)
Page 99: My Menu
My menu Press. Press. §My menu§ Create your own menu with fre- quently used functions, phone num- bers or WAP pages. The list of 10 entries is preset. You can, however, change it as you want. Select the required entry. Confirm.
Page 100: Fast Access Key
Fast access key You can assign one important phone number of a function to each one of the two soft keys and number keys 2 to 9 (speed-dial numbers). The phone number can then be dialled or the function can be started at the touch of a button.
Page 101: Speed Keys
Speed keys Number keys 2 to 9 can be used as speed dialling numbers for fast access. Number key 1 is reserved for the mailbox phone number (p. 68) and number key 0 is reserved for switching over two connections dur- ing use (p.
Page 102: Organiser
Organiser Calendar ¢ ¢ Calendar You can enter appointments in the calendar. Time and date must be set for the Calendar to work correctly. The calendar offers you three views: Monthly view Special colour coding: Day with entries for appointments, day-long appointments, weekend Navigation: One day forward/back.
Page 103: Appointments
Appointments ¢ ¢ Appointments Appointments are displayed in chronological order in a list. Enter new appointment <New entry> Select. Types: Memo Text input for description Voice memo Enter voice memo. Shown with alarm. Call Enter phone number to be displayed with the alarm.
Page 104: Tasks
Alarm time: On/off Silent alert. Enter the timespan before the appointment and select the time unit: Minutes, Hours, Reoccurrence: Select a timeframe for repeating the appointment: No, Daily, Weekly, Monthly, Enter a parameter for repeating: Forever, Until, Occurrences is selected, certain week- Weekly days can be highlighted.
Page 105: Notes
Status: Choose between: Done Priority: Selection in 5 levels of Highest. Use date If activated with Yes, the following time-input option is offered. Due date:/Expiry time: Enter the date and time by when the task is to be completed. Alarm: and Standard as for ments.
Page 106: Dictat.machine
Dictat.machine ¢ ¢ Dictat.machine Use the dictating machine to record short voice memos. • Use your phone as a dictating machine when on the move. • Record a memo as a reminder or as a note for others. • Add a voice memo to an appoint- ment in the Calendar.
Page 107: Time Zones
Time zones ¢ ¢ Time zones The time zone can be selected in the world map or a city list: World map Select the desired recording. City list Select a city in the selected time zone. Time zone options §Options§ Open menu.
Page 108: Extras
Extras Walky Talky This application can be used to simultaneously connect multiple subscribers. Like a normal Walky Talky, only one subscriber can speak at a time. The others can only listen until the speaker allows others to talk. A recipient is selected using their Walky Talky address (WT ID) or their phone number.
Page 109 <Add from grp> Select group. Open Select and mark recipient. Add recipient. §Select Starting a session If all the desired subscribers are combined, start the session: The subscribers are dis- played, and the author- ised speaker is shown in bold. Speaking rights The list of subscribers is displayed.
Page 110 Letting the session run in the background The current session remains active in the background. A phone call ends the session. Putting Walky Talky in the background Press and hold. Using Walky Talky again ¢ ¢ Walky Talky Sessions Continue session again. Walky Talky options Open menu.
Page 111 Records ¢ ¢ Walky Talky Select the list of received and made WT calls as well as the option to delete all lists. You can mark subscribers for one session in the list. Start session. The function Create as group can be used to combine §Options§...
Page 112 Viewing group properties Select group. View properties. Open menu. §Options§ Add to d Copy group ID to the Addressbook. Edit Edit (your own) group. Copy ID to clip Save group ID (WT ID) in the clipboard. Memberlist Display the member list. Rejectlist Display the refused subscribers.
Page 113: Sim Services (Optional)
• Hold mode Depending on the setting, must be pressed and held to speak. • Default view Session view History • Request pres. The saved properties are displayed. Server Settings for the server. Please check with your service provider. Advanced Further settings.
Page 114: Sound Recorder
Set alarm call time (hh:mm). Switch to the week days. Navigate to the various days. Display options: alarm call time and days. é Alarm clock Mo Tu We Th Fr Sa Su Edit Set days for alarm calls. Press again to delete the highlighting.
Page 115: Calculator
Playback Select the desired recording. Playback/pause, alternately. Press and hold rapid rewind and fast forward. Open menu. §Options§ Loudspeaker Playback via the built- in loudspeaker. Set as... Set the recording as a ringtone. (For standard functions see p. 15) Calculator ¢...
Page 116: Unit Converter
Calculator options Open menu. §Options§ Convert Call up the unit con- verter with the current result. Clear all Delete all units. Extended mode/ Convert calculation Basic mode functions. (For standard functions see p. 15) Unit converter ¢ ¢ Unit converter You can convert various measure- ment units into other measurement units.
Page 117: Stopwatch
Now enter the name and exchange rate of the currency to be converted. Open menu. §Options§ Add currency Enter new currency and exchange rate. Set as base Use entered currency as basic currency. Edit rate Change the exchange rate of the basic currency. Calc.
Page 118: Remote Synchronisation
(addresses, calendar, etc.) and syn- chronise these with the data on your phone. The data can, for example, be saved on a company computer or in the Internet. www.siemens-mobile.com/syncml Syncronise The computer is selected §Sync§ and synchronisation started. When completed,...
Page 119: Device Manag
• The access profiles must be configured manually. If necessary, check with your service provider for details. You will find the current settings for the service provider on the Internet at www.siemens-mobile.com/ mobilescustomercare under "FAQ". ¢ Device manag.
Page 120: Active Profile
Active profile A standard profile for downloading the current software of the operating system is displayed. Establish a connection to §Sync§ the active profile. Call up profile list. §Edit§ Select profile. Activate profile. Set profile. §Edit§ Last connect. Display last connection.
Page 121: Media Player
Media player When you are viewing a picture/ video or listening to a melody, the application starts a media playback. Scroll to the next media file. Pictures The following functions can be applied to a displayed picture: Zoom function if the dis- played picture has a higher resolution than the display.
Page 122: My Stuff
My stuff To organise your files, you can use the file system like a PC file manager. There are some folders in the various data types for this pur- pose. Remember that pictures and sounds may be protected (DRM, p. 13). ¢...
Page 123 Index structure Some folders have already been cre- ated for different data types in stuff. These folders cannot be changed. Folder Description Pictures Pictures Videos Videos Animations Switch on/off animations Sounds Melodies Themes Loaded theme (zipped) Theme configuration (unzipped) Skins Loaded user interfaces.
Page 124: Mobile Phone Manager
IrDA or a data cable (See Accessories, p. 133). You can download the software from the Internet: www.siemens-mobile.com/cx70 Contacts Management You can use contacts management to manage the personal contacts you have stored in your phone, to add new ones and to delete and edit them.
Page 125: Phone Explorer
Bookmark Management Use your PC to browse on the Inter- net and define your preferred Inter- net sites. Save the Internet addresses as bookmarks on your phone so that you can quickly call them up at a later time when you are on the move.
Page 126: Questions & Answers
Questions & Answers If you have any questions about using your phone, visit us at www.siemens-mobile.com/mobilescustomercare anytime. For additional help, we have listed below some frequently asked questions and answers. Configuration service To help you set up your mobile phone for the data service WAP, MMS, e-mail and Internet, you can use a configuration service.
Page 127 Problem Possible causes SIM error. SIM card not inserted correctly. Check that the SIM card is inserted correctly (p. 9). Dirty SIM card contacts. SIM card with wrong voltage. SIM card damaged (e.g. broken). No network connec- Weak signal. tion. Outside GSM range.
Page 128 Enter the PUK (MASTER PIN) supplied with the SIM card according to the instructions. If the PUK (MASTER PIN) has been lost, please contact your service provider. Contact Siemens Service (p. 128). Check with your service provider. Check settings (p. 91). # 9 9 9 9 #...
Page 129: Customer Care
You can also get personal advice about our range of products on our Premium Hotline: United Kingdom ... 0906 9597500 (0.75 £ per minute) Qualified Siemens employees are waiting to offer you expert information about our products and installation. In some countries repair and replace serv- ices are impossible where the products are not sold through our authorised dealers.
Page 130 Customer Care Morocco ...22 66 92 09 Netherlands ...0 90 03 33 31 00 New Zealand...08 00 57 43 63 Nigeria ...0 14 50 05 00 Norway...22 70 84 00 Oman ... 79 10 12 Pakistan ...02 15 66 22 00 Paraguay ...8 00 10 20 04 Philippines ...0 27 57 11 18 Poland...08 01 30 00 30...
Page 131: Care And Maintenance
Care and maintenance Your phone has been designed and manufactured to the highest of standards and should be treated with great care. The suggestions below will help you to enjoy your phone for many years. • Protect your phone from moisture and humidity! Precipitation, humidity and liquids contain min- erals that will corrode electronic...
Page 132: Product Data
Product data Declaration of conformity Siemens Information and Communication mobile hereby declares that the phone described in this user guide is in compliance with the essential requirements and other relevant provisions of European Directive 1999/5/EC (R&TTE). The declaration of con- formity (DoC) concerned has been signed.
Page 133: Quality
After six months, if the battery is clearly suf- fering from loss of performance, we recommend that you replace it. Please buy only Siemens original batteries. Display quality declaration For technological reasons, a few small dots with different colours may appear in the display in exceptional cases.
Page 134: Accessories
Alterna- tively, you can visit our online shop. Carrying Cases A range of carry cases is available at spe- cialist shops or you can visit the Siemens Mobile Store online: Original Siemens Accessories www.siemens-mobile.com/ shop...
Page 135: Car Solutions
The power is sup- plied via the cigarette lighter socket. Optional Car Kit accessories Car Data Adapter HKO-690 Phone-In Adapter Cable HKO-570 Products can be obtained in specialist shops or you can visit the Siemens Mobile Store online: Original Siemens Accessories www.siemens-mobile.com/ shop...
Page 136: Guarantee Certificate (Uk)
• In the case of new devices and their com- ponents exhibiting defects resulting from manufacturing and/or material faults within 24 months of purchase, Siemens shall, at its own option and free of charge, either replace the device with another device reflecting the current state of the art, or repair the said device.
Page 137: Guarantee Certificate (Irl)
• In the case of new devices and their com- ponents exhibiting defects resulting from manufacturing and/or material faults within 24 months of purchase, Siemens shall, at its own option and free of charge, either replace the device with another device reflecting the current state of the art, or repair the said device.
Page 138 • Insofar as no Guarantee default exists, Siemens reserves the right to charge the customer for replacement or repair. • The above provisions does not imply a change in the burden of proof to the detri- ment of the customer.
Page 139: Sar - European Union (Rtte)
Siemens web site at www.siemens-mobile.com While there may be differences between the SAR levels of various phones and at various positions, all Siemens products meet the legal requirements. The World Health Organization (WHO, CH-1211 Geneva 27, Switzerland) states that present scientific information...
Page 140: Sar - International (Icnirp)
The highest SAR value for this model phone when tested for use at the ear is 0.67 W/kg*** SAR information can also be found at www.siemens-mobile.com While there may be differences between the SAR levels of various phones and at various positions, they all meet the international guidelines for safe RF exposure.
Page 141: Menu Tree
Menu tree > Default book Show entries <New entry> Business card Groups Default book <Info numbers> > Calls missed Call records Calls received Calls dialled Delete records Durat/charges > URL/service provider Surf & fun Games Applications Downl. assist. Bookmarks Emoty Internet Camera >...
Page 142 > Inbox Messages Draft Unsent Sentbox MMS templates SMS archive Text modules Message setup > E-mail WAP push Retr. e-mail Send/rec. mail CB services > E-mail > E-mail Retr. e-mail Send/rec. mail > E-mail > Text zoom > SMS profiles SMS signature >...
Page 143 > Message setup Messages > Organiser Calendar Appointments Tasks Notes Missed appts. Dictat.machine Time zones Calendar setup > SIM services Extras Walky Talky Alarm clock Sound recorder Calculator Unit converter Stopwatch Countdown Device manag. Remote syncr. My stuff > Profiles Setup Themes Display...
Page 144 > Display Setup Dynamic light Ringtones Phone Pilot Call setup > Own greeting Big letters Illumination > Ringer setting Silent alert Volume Calls Group calls Other calls Walky Talky More melodies > Hide ID Call waiting Divert Call screening Any key answ. Minute beep >...
Page 145 > Phone setup Setup Clock Connectivity Security > Key tones Info tones Automatic switch off Phone identity Memory assis. File system Master reset > Time/date Time zones Date format Time format Buddhist year Show clock Auto time zone > GPRS GPRS info IrDA Data services...
Page 146 > Security Setup Network Accessories > Barrings > Line Network info Choose netwrk Auto network Pref. network Band selection Fast search User group > Car Kit Key assignm. Headset > All outgoing Outgoing intl. Out.int.x.home All incoming When roaming Status check Clear all >...
Page 147: Index
Index Accessories... 133 Additional books... 37 Addressbook Dial entry... 33 Groups ... 34 New entry... 31 Read entry ... 33 Aircraft mode ... 76 Alarm Alarm clock... 112 Type ... 103 Alarm clock ... 112 All calls (call time/charge) ... 39 All calls (diversion) ...
Page 148 Charging the battery... 10 Clock... 88 Codes... 17 Colour scheme ... 79 Conference... 26 Connection profiles ... 90 Contact list ... 62 Control code (DTMF) ... 28 Countdown ... 116 Credit limit ... 39 CSD settings ... 90 Data connection ... 89 Date format...
Page 149 Identity number (IMEI)... 86 IMEI number... 86 Inbox... 53 Info tones... 86 Information services (CB)... 69 Infrared ... 89 Infrared (IrDA) ... 89 Input language (T9)... 20 Inst. Message ... 61 International dialling code ... 24 Internet... 70 Kamera ... 40 Key tones ...
Page 150 Set time/date ... 88 Settings ... 75 Short message (SMS) ... 43 Shown in the display ... 7 Shut down animation... 80 Siemens City Portal ... 29 Signal strength ... 13 Silent alert ... 81 SIM card Clear barring ... 18 Insert ...
Page 151 Standard functions ... 15 Standby mode ... 14 Standby time ... 10, 131 Start up animation... 80 Stopwatch... 116 Storage location (Phonebook) ... 35 Surf & fun... 70 Swap... 25 Switch off phone Automatic... 86 Manually ... 12 Switch on phone ... 12 Symbols ...

This manual is also suitable for:

Cxv70 Cxt70

Siemens CX70 User Manual

Safety Precautions

Telephone List (Schematic)

Display Symbols

Getting Started

Switching Phone on and Off/Entering PIN

General Instructions

Standard Functions

Security

Text Entry

Calling

My Phone

Default Book

Addressbook

Phonebook

Call Records

Durat/Charges

Camera

Inbox

Sms

Mms

E-Mail

Inst. Message

2 Table of Contents

Voice Message/Mailbox

CB Services

Surf & Fun

Setup

My Menu

Fast Access Key

Organiser

Extras

Media Player

My Stuff

Mobile Phone Manager

Questions & Answers

Customer Care

Care and Maintenance

Product Data

Quality

Accessories

Guarantee Certificate (UK)

Guarantee Certificate (IRL)

SAR - European Union (RTTE)

SAR - International (ICNIRP)

Menu Tree

Index

Quick Links

Related Manuals for Siemens CX70

Summary of Contents for Siemens CX70