Using Location Service; Setting Tty Mode - Sanyo SCP-7200 Operating Manual

Dual band

Hide thumbs Also See for SCP-7200:

Table of Contents

Using Location Service

To turn the Location Service On or Off:

1. From the Standby mode, press Menu/OK to display the main menu.

2. Highlight Settings, and press Menu/OK.

3. Highlight Location, and press Menu/OK.

4. Press Menu/OK or wait a few seconds until scrolling of the message completes.

5. Select On or Off, and press Menu/OK.

Tip: These icons let you know whether information of your position is sent to the

network or not. If you are in no service or roaming area, indication is always

indicates the Location Service is enabled.

indicates the Location Service is disabled.

This feature set the TTY Mode to on or off.

A TTY(also known as TDD or Text Telephone) is a telecommunications device that

allows people who are deaf or hard of hearing, or who have speech or language

disabilities, to communicate by telephone. Connect the TTY device to the Headset Jack

of Your PCS Phone. Then, type the message you want to send on the TTY's keyboard.

To Turn the TTY Mode On or Off:

1. From the Standby mode, press ##889.

2. Press Menu/OK.

3. Highlight Save Phone#, and press Menu/OK.

4. Highlight Accessibility, and press Menu/OK.

5. Highlight TTY On or TTY Off, and press Menu/OK.

l Highlight Learn More at step 5 above for instruction.

Table of Contents