Making And Answering Calls; Making Calls; Answering Calls - Sanyo SCP-7200 Operating Manual

Making and Answering Calls

Making Calls

Your PCS Phone offers many different ways to make calls, including PCS Voice
Command, Speed Dialing and using Call History.
1. Make sure your phone is On.
2. Enter a phone number. (If you make a mistake while dialing, press BACK to erase
one digit at a time. Press and hold BACK to erase the entire number.)
3. Press TALK or SPEAKER (To make a call when you are roaming and Call Guard is
enabled, press Menu/OK, highlight Roam Call or Roam:Speaker On and press
Menu/OK.
4. When you're finished, press END/ .
Tip: To redial your last outgoing call, press TALK or SPEAKER twice.
Tip: When making calls off the enhanced Sprint Nationwide PCS Network, always dial
using 11 digits (1+ area code + phone number).

Answering Calls

1. Make sure your phone is on. If your phone is off, incoming calls go to voicemail.
2. When a call comes in, answer the call by pressing TALK or SPEAKER.
Depending on your settings, your PCS Phone notifies you of incoming calls in the
following ways:
The phone rings and/or vibrates.
l
The LED flashes.
l
The backlight illuminates on the LCD.
l
If the phone number is available, the phone number of the caller is displayed on the
l
LCD.
If the phone number is in your Internal Phone Book, the Phone Book entry's name
l
is displayed on LCD.
The picture is displayed when you have set the downloaded picture to "Incoming
l
Calls".
The following options are also displayed by pressing Menu/OK. To select an option,
highlight it and press Menu/OK.
Options
Call Guard to answer the call when you are in roaming.( This feature appears when
l
you are in digital area and analog service area.) See "Call Guard" on pages 36-37.
Answer to answer the call.
l
Answer:Speaker to answer the call with Speakerphone mode.
l
Skip to hang up the incoming call and return to Web while you are in the Web
l
operation. (This feature appears when PCS Vision access is dormant..)
Screen Call to answer the call by using pre-recorded announcement. (This feature
l
11