Charging The Battery; Using The Travel Charger - Sanyo SCP-7200 Operating Manual

Charging the Battery

Your PCS Phone comes with a rechargeable battery. You should charge the battery as
soon as possible so you can begin using your phone.
Keeping track of your battery's charge is important. If your battery level becomes too
low, your phone automatically turns off and you will lose all the information you were
just working on. For a quick check of your phone's battery level, glance at the battery
charge indicator located in the upper-right corner of phone's display screen. If the
battery charge gets too low, the blank battery icon appears and the phone sounds a
warning tone.
Always use a Sprint-approved desktop charger, travel charger or vehicle power Adapter
to charge your battery.
Warning! Using the wrong battery charger could cause damage to your phone and void
the warranty.

Using the Travel Charger

Use only an approved charger with your phone.
1. Plug the Travel Charger into a wall outlet.
2. Plug the other end into the Travel Charger into the bottom of your phone, with the
battery installed.
Charging when your phone is turned on:
l
The battery icon
The battery icon turns to
Charging when your phone is turned off:
l
The battery icon
shown on the display while charging. When the battery is completely discharged, you
may wait for several minutes until the message is shown on the display. The battery
icon turns to
charging complete.
appears on the display while charging.
when charging is complete.
appears, and the message "BATTERY CHARGING-Power Off-" is
, and message changes to "CHARGING COMPLETE-Power Off-" when
10