Selecting Ringer Types For Messages; Selecting A Tone Length; Setting Start-Up/Power-Off Tone - Sanyo SCP-7200 Operating Manual

Selecting Ringer Type for Messages
To select a ringer type for text message:
1. From the Standby mode, press Menu/OK to display the main menu.
2. Highlight Settings, and press Menu/OK.
3. Highlight Sounds, and press Menu/OK
4. Highlight Ringer Type, and press Menu/OK.
5. Highlight Messaging, and press Menu/OK.
6. Select the menu under Messaging and press Menu/OK.
7. Highlight your desired ringer type, and press Menu/OK.
l Voice Ringer: notify you with Voice for Message.
Get New : start up a Browser and you can select an item to download.
l

Selecting a Tone Length

Longer tone length may be better for tone recognitions when dialing voicemail or other
automated systems.
To select a tone length:
1. From the Standby mode, press Menu/OK to display the main menu.
2. Highlight Settings and press Menu/OK.
3. Highlight Sounds and press Menu/OK.
4. Highlight Others and press Menu/OK.
5. Select the menu under Tone Length press Menu/OK.
6. Highlight Short or Long and press Menu/OK.

Setting Start-up/Power-off Tone

1. Follow the steps 1 to 4 above.
2. Select the menu under Start-up Tone, Power-off Tone and press Menu/OK.
3. Highlight your desired option, and press Menu/OK.
Get New :start up a Browser and you can select an item to download
Tip: The volume of Start-up Tone and Power-off Tone can be set the volume setting. See
page 19 for instructions.
21