Handheld and Bodypack Transmitter Controls and Connectors
³ Interchangeable microphone head (BETA 87A pictured).
· LCD Panel.
» Power Switch.
¿ Control buttons for LCD interface.
´ Infrared (IR) port. See page 15.
² Battery compartment.
Transmitter LCD Interface
779.475MHz
Main Menu
Transmitter Batteries
Transmitters operate on standard AA batteries. Turn off the transmitter before changing the batteries.
The battery fuel gauge displayed on the transmitter LCD gives an indication of remaining battery life, as shown below.
exit Key. Move to the left, or exit
without saving changes.
Transmitter Display
15 minutes to 2 hours
* High power setting not available with models sold in countries that prohibit its use.
¶
·
¿
´
²
¶ Flexible Antenna.
º Power LED.
¾ 4-Pin Microphone Input Jack.
µ Reversible Belt Clip.
Up Arrow Key. Scroll up
or increase a value.
Down Arrow Key. Scroll
down or decrease a value.
Approximate Hours Remaining
(alkaline batteries)
Normal Power
7.5 to 9.5
5.75 to 7.5
4 to 5.75
2 to 4
10 minutes to 1.5
»
º
¾
µ
enter Key. Press to select parameters
and accept the selected value.
High Power*
5 to 6
4 to 5
3 to 4
1.5 to 3
English
13