Dell DSS 2500 Owner's Manual page 34

Related links
Boot Settings
Boot Settings details
Viewing Boot Settings
Network Settings
You can use the Network Settings screen to modify PXE device settings. The network settings option is available only in the UEFI mode.
NOTE: The BIOS does not control network settings in the BIOS mode. For the BIOS boot mode, the optional Boot ROM of the
network controllers handles the network settings.
Related links
UEFI iSCSI Settings
Network Settings screen details
UEFI iSCSI Settings details
System BIOS
Viewing Network Settings
Viewing UEFI iSCSI Settings
Viewing Network Settings
To view the Network Settings screen, perform the following steps:
1 Turn on, or restart your system.
2 Press F2 immediately after you see the following message:
F2 = System Setup
NOTE: If your operating system begins to load before you press F2, wait for the system to finish booting, and then restart
your system and try again.
3 On the System Setup Main Menu screen, click System BIOS.
4 On the System BIOS screen, click Network Settings.
Related links
Network Settings
Network Settings screen details
Network Settings screen details
The Network Settings screen details are explained as follows:
Option Description
PXE Device n (n = 1 Enables or disables the device. When enabled, a UEFI boot option is created for the device.
to 2)
PXE Device n Enables you to control the configuration of the PXE device.
Settings(n = 1 to 2)
Related links
Network Settings
Viewing Network Settings
34 Pre-operating system management applications