Dell DSS 2500 Owner's Manual page 145

1 Follow the safety guidelines listed in the Safety instructions section.
2 Follow the procedure listed in the Before working inside your system section.
3 Keep the Phillips #2 screwdriver ready.
Steps
1 Unpack the new system board assembly.
CAUTION: Do not lift the system board by holding a memory module, processor, or other components.
CAUTION: Take care not to damage the system identification button while placing the system board into the chassis.
2 Hold the system board and lower it into the chassis.
3 Push the system board toward the back of the chassis until the board clicks into place.
Figure 78. Installing the system board
1 system board
4 Install the screws that secure the system board onto the chassis.
Installing and removing system components 145