High Limit Switch Installation - Napoleon Dynamic Heat Control LVX38 Installation Manual

4.1

high limit switch installation

WARNING
!
• High Limit Switch installation is MANDATORY. Failure to correctly install will cause a fire hazard.
Bracket Install
Location
1.) Remove jumper plug from control board (marked "X4")
and install plug with spade connectors to the control
board. Discard the original jumper plug.
Dynamic Heat Control™ installation
access side
Wire Harness
"X4"
Control Board
Plug with spade
connectors
Wire Harness
EN
11
W415-1739 / C / 08.03.17