Lighting Charcoal; Setting Up The Barbecue For Direct; Barbecuing Method - Weber E-4710 Owner's Manual

Charcoal barbecue
Hide thumbs Also See for E-4710:
Table of Contents

Advertisement

LIGHTING CHARCOAL

Before lighting charcoal, determine which
barbecuing method you will be using.

Setting Up the Barbecue for Direct

Barbecuing Method

Lighting the Charcoal Using a
Chimney Starter
The simplest, most thorough way to light any kind
of charcoal is to use a chimney starter; particularly,
the WEBER RAPIDFIRE chimney starter (sold
separately). Refer to the cautions and warnings
included with the RAPIDFIRE chimney starter
before lighting charcoal.
1. Put a few sheets of crumpled up newspaper
in the bottom of the chimney starter and set
the chimney starter on the charcoal (bottom)
grate (A); or put a few lighter cubes in the centre
of the charcoal grate and place the chimney
starter over them (B).
2. Fill the chimney starter with charcoal (C).
3. Using a long lighter or matchstick, light the
lighter cubes or newspaper through the holes
on the bottom side of the chimney starter (D).
4. Keep the chimney starter in place until the
charcoal is fully lit. You know the charcoal is
fully lit when it is covered with a coating of
white ash.
Note: Lighter cubes must be completely consumed and
the charcoal ashed over before placing food on the
cooking grate. Do not cook before the charcoal has a
coating of ash.
5. Once the charcoal is fully lit, continue to the
following pages for cooking instructions
according to your desired barbecuing method.
Lighting the Charcoal Without a
Chimney Starter
1. Build a pyramid of charcoal in the centre of
the charcoal (bottom) grate and insert a couple
of lighter cubes (sold separately) within the
pyramid.
2. Using a long lighter or matchstick, light the
lighter cubes. The lighter cubes will then ignite
the charcoal (E).
3. Wait for the charcoal to fully light. You know
the charcoal is fully lit when it is covered with a
coating of white ash.
Note: Lighter cubes must be completely consumed and
the charcoal ashed over before placing food on the
cooking grate. Do not cook before the charcoal has a
coating of ash.
4. Once the charcoal is fully lit, continue to the
following pages for cooking instructions
according to your desired barbecuing method.
A
B
C
D
E
www.weber.com
7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

E-5710

Table of Contents