Reshipment - HP 27113A Installation And Configuration Manual

Installation and Configuration
Reshipment
3-8
Table 3-3. De\/ice Connector J2
PIN NO. SIGNAL SIGNAL DEFINITION
MNEMONIC
Al SAFETY Cable outer shield (chassis ground)
A2
SAFETY Cable ollter shield (chassis ground)
A3 ATN Attention
A4 SRQ Service Request
AS IFC Int.erface Clear
A6 NDAC Not Data Accept.ed
A7 NRFD Not Ready For Data
A8 DAV Data Valid
A9 EOI End Or Identify
AIO 0104 Data Input/Output, Bit 4
All 0103 Data Input/Out.put, Bit 3
AI2 0102 Data Input./Output, Bit 2
AI3 0101 Data Input./Output, Bit I
Bl
GND Ground
B2 GND
B3 GND
B4 GND
B5 GND
B6 GND
B7
GND
B8 GND Ground
B9 REN Remot.e Enable
BI0 0108 Data Input/Output, Bit 8
Bll 0107 Data Input/Output, Bit 7
Bl2 0106 Data Input/Output, Bit 6
B13 0105 Data Input/Output, Bit 5
If the HP-IB card is to be shipped to Hewlett-Packard for any reason, attach a
tag identifying the owner and indicating the reason for shipment. Include the
part number of the HP-IB card.
Pack the HP-IB card in the original factory packing material, if available. If the
original material is not available, good commercial packing material should be
used. Reliable commercial packing and shipping companies have the facilities
and materials to repack the item. BE SURE TO OBSERVE ANTI-STATIC
PRECAUTIONS.