Hp-Ib Supported Functions - HP 27113A Installation And Configuration Manual

General Information
HP-IB Supported Functions
The 27113A card is designed to support the following HP-IB Interface Functions
as defined by the IEEE Standard 488-1978. (The HP-IB is Hewlett-Packard's
implementation of the I EEE Standard 488-1978.) These functions are fully
supported by the H P 27113A unless noted otherwise.
Mnemonic----Controller Functions:
C1 System Controller
C2 Send Interface Clear and Take Control
C3 Send Remote Enable
C4 Respond to Service Request
C5 Send Interface Messages, Receive Control, Pass
Control, Pass Control to Self, Parallel Poll, Take
Control Synchronously
Mnemonic----Controlled Device Functions:
SR1 Service Request
RL2 Remote Local
PP1 Parallel Poll
DC1 Device Clear
DT1 Device Trigger
The following utiJity functions are provided to support the above listed
functions:
Mnemonic----Utility Functions
SH1 Source Handshake
AH1 Acceptor Handshake
T1 Basic Talker, Serial Poll, Talk Only
TE1 Basic Extended Talker, Serial Poll, Talk Only,
Unaddress if My Listener Address and My Secondary
Address (requires host software support)
L1 Basic Listener, Listen Only Mode
LE1 Basic Extended Listener, Listener Only Mode,
Unaddress if My Secondary Address and Talker
Primary Addressed State (requires host software
support)
1-5