Recording - Sherwood RD-6108 Operation Instructions Manual

RECORDING

The analog signals from the 6 CH DIRECT inputs as well as the digital signals from the coaxial or optical digital
input can be heard but cannot be recorded.
The volume and tone (bass, treble) settings have no effect on the recording signals.
Recording with TAPE MONITOR
Select the desired input as a recording
1
source except for TAPE MONITOR.
AUDIO VIDEO
or
Be sure that "TAPE M" goes off.
Dubbing from video components onto
VIDEO 1
Select VIDEO 2 or VIDEO 3 as a recording
1
source.
VIDEO
or
Dubbing the audio and video signals
separately onto VIDEO 1
Example) When dubbing the VIDEO 2 video signal
and the CD audio signal separately onto
VIDEO 1.
Select VIDEO 2 as a video recording source.
1
VIDEO
or
VIDEO1
POWER DISPLAY SLEEP VIDEO1
1 2 3 VIDEO2 VIDEO2
4 5 6 VIDEO3
7 8 9 CD
T.TONE 0 P.SCAN TUNER
VIDEO3
DSP MODE D.TIME ADJUST AUX
AUTO CH. SEL MUTE T.MON
CH. LEVEL MASTER VOLUME
CD
REMOTE CONTROL UNIT RM-105
TUNER
AUX
POWER DISPLAY SLEEP VIDEO1
VIDEO2
1 2 3 VIDEO2
4 5 6 VIDEO3
7 8 9
CD
T.TONE 0 P.SCAN TUNER
DSP MODE D.TIME ADJUST AUX
VIDEO3
AUTO CH. SEL MUTE T.MON
CH. LEVEL MASTER VOLUME
REMOTE CONTROL UNIT RM-105
POWER DISPLAY SLEEP VIDEO1
VIDEO2
1 2 3 VIDEO2
4 5 6
VIDEO3
7 8 9 CD
T.TONE 0 P.SCAN TUNER
DSP MODE D.TIME ADJUST AUX
AUTO CH. SEL MUTE T.MON
CH. LEVEL MASTER VOLUME
REMOTE CONTROL UNIT RM-105
Start recording on the TAPE MONITOR.
2
Start play on the desired input.
3
For tape monitor function, refer to "TAPE
MONITOR function" on page 10.
Start recording on the VIDEO 1.
2
Start play on the VIDEO 2 or the VIDEO 3.
3
The audio and video signals from the VIDEO 2 or the
VIDEO 3 will be dubbed onto the VIDEO 1 and you
can enjoy them on the TV set and from the speakers.
Select CD as an audio recording source.
2
AUDIO
or
21
POWER DISPLAY SLEEP VIDEO1
1 2 3 VIDEO2
4 5 6 VIDEO3
CD
7 8 9
CD
T.TONE 0 P.SCAN TUNER
DSP MODE D.TIME ADJUST AUX
AUTO CH. SEL MUTE T.MON
CH. LEVEL MASTER VOLUME
REMOTE CONTROL UNIT RM-105