Sherwood RD-6106 Operation Instructions Manual page 20

Select the desired preset number (1~30) and
3
press the MEMORY/ENTER button.
TUNING/PRESET
When using the NUMERIC buttons on the remote
control.
Examples)
3
For "3" :
within 2 seconds
1 5
For "15" :
The station has now been stored in the memory.
When using the NUMERIC buttons, the station is
stored automatically without pressing the
MEMORY/ENTER button.
A stored frequency is erased from the memory by
storing another frequency in its place.
If "MEM" goes off, start again from step 2 above.
Tuning to preset stations
After selecting the tuner as an input
1
source, select the preset tuning mode.
T/P MODE
Then "PRESET" lights up.
Listening to FM stereo broadcasts
While listening to FM broadcasts.
Each time this button is pressed,
the FM mode changes as follows;
Stereo mode : "ST" lights up.
Mono mode : "ST" goes off.
When FM stereo broadcasts are poor because of
weak broadcast signals, select the FM mono mode to
reduce the noise, FM broadcasts are then reproduced
in monaural sound.
MEMO/ENTER
The following items, set before the receiver is turned
off, are memorized.
Note : If the electricity fails or the AC input cord is
Scanning preset stations in sequence
FM MODE
20
Repeat the above steps 1 to 3 to memorize
4
other stations.
MEMORY BACKUP FUNCTION
INPUT SELECTOR settings
Surround mode settings
Preset stations,etc.
disconnected for more than 2 weeks, all
memorized functions will be lost. Please enter
them into memory, again.
Select the desired
2
preset number.
When using the NUMERIC buttons on the remote
control.
Examples)
3
For "3":
within 2 seconds
1 5
For "15":
When selecting the desired preset number with the
NUMERIC buttons, the desired preset station will be
tuned to automatically without first selecting the
preset tuning mode.
POWER P .SCAN
P .SCAN
1 2 3 4 5
6 7 8 9 0
DISC
CD
REPEAT INTRO
A B < <
A
DECK SEL.
B DECK
PRESET USER FILE T .MON DISPLAY
CD TUNER VIDEO1 EQUALIZER
AUX TAPE MON. VIDEO2 STEREO
6CH DIRECT VIDEO3 AUTO DSP MODE
INPUT
SELECTOR
T .TONE CH SEL.
D.TIME ADJUST
CH LEVEL MASTER
DISPLAY SLEEP MUTE
SYS
The receiver will start scanning the stations in the preset
sequence and each station is received for 5 seconds.
At the desired station, press this button again to stop
scanning.
TUNING/PRESET