Fiber Optic Ethernet Ports - RuggedCom RSG2300 Installation Manual

RUGGEDCOM RSG2300
Installation Guide
Specifications
For specifications on the available copper Ethernet ports, refer to
Specifications".
Section 4.2

Fiber Optic Ethernet Ports

Fiber optic Ethernet ports are available with either MTRJ (Mechanical Transfer Registered Jack), LC (Lucent
Connector), SC (Standard or Subscriber Connector) or ST (Straight Tip) connectors. Make sure the Transmit (Tx)
and Receive (Rx) connections of each port are properly connected and matched to establish a proper link.
1
Figure 17: MTRJ Port
1. Tx Connector 2. Rx Connector
Fiber Optic Ethernet Ports
Pin
3
4
5
6
7
8
2
Figure 18: LC Port
1. Tx Connector 2. Rx Connector
Name
10/100Base-TX 1000Base-TX
TX+ BI_DB+
Reserved (Do BI_DC+
Not Connect)
Reserved (Do BI_DC-
Not Connect)
TX- BI_DB-
Reserved (Do BI_DD+
Not Connect)
Reserved (Do BI_DD-
Not Connect)
Section 5.4, "Copper Ethernet Port
1
Chapter 4
Communication Ports
Description
Transmit Data+
or Bi-Directional
Pair B+
Transmit Data+
or Bi-Directional
Pair C+
Receive
Data- or Bi-
Directional Pair C-
Transmit
Data- or Bi-
Directional Pair B-
Receive Data-
or Bi-Directional
Pair D+
Receive
Data- or Bi-
Directional Pair D-
2
23