Playing Back Tapes - Sherwood Newcastle D-480 Operating Instructions Manual

Operations

PLAYING BACK TAPES

Press the POWER switch to turn the power on.
1
Insert the cassette with exposed tape side facing down. To close the cassette door, push the door
2
until it locks shut.
EJECT
According to the type of the tape loaded, you will see the following display(Auto Tape Selector).
B C
HIGH NORM
CD SYN MPX
REC
L
dB -00 -20 -10
R
The type of a tape loaded is detected automatically by the auto tape selector and recording bias and
equalization are set automatically according to the characteristics of the tape such as normal, chrome or
metal tape.
If the tape is recorded with Dolby NR system, select the corresponding Dolby NR system.
3
Each time this button is pressed, the Dolby NR system changes as follows;
On commercial pre recorded cassette tapes, if Dolby NR or
the tapes are recorded with the Dolby B NR.
M
RELAY P
MIN SEC
REC
-6 -3 0 +3 +6
NR B/C/OFF
→DOLBY B→DOLBY C→OFF
POWER
ON/OFF
Normal tape : "NOR" is displayed.
Chrome tape : "CR" is displayed.
Metal tape : "ME" is displayed.
appears but Dolby C is not specified,
8