Sherwood Newcastle D-480 Operating Instructions Manual page 14

Press the DUBBING MODE button to
3
select the normal or high speed(1.5 times
normal speed) dubbing.
High quality sound will be obtained in the nomal
speed dubbing mode.
NORMAL
Then dubbing will start.
NOTE
During dubbing, the Dolby NR is automatically set to OFF and the recorded tape can be dubbed as it is.
During dubbing, do not change the speed. If so, tape click noise may be recorded.
During dubbing, the settings of the REC LEVEL and the REC BALANCE controls are ignored.
SELECTING A COUNTER MODE
There are two kinds of counter mode: tape counter, time counter for displaying the elapsed recording or playback time.
Select the desired counter mode.
Example : When selecting the time counter.
Each time this button is pressed, the counter mode
changes as follows;
→ TAPE COUNTER → TIME COUNTER
DUBBING
HIGH
To stop dubbing.
4
MODE
B C
HIGH NORM
CD SYN MPX
REC
L
dB -00 -20 -10
R
TAPE COUNTER mode
B C
HIGH NORM
CD SYN MPX
REC
L
dB -00 -20 -10
R
TIME COUNTER mode
14
M
RELAY P
MIN SEC
REC
-6 -3 0 +3 +6
M
RELAY P
MIN SEC
REC
-6 -3 0 +3 +6