Memorizing The Specific Point - Sherwood Newcastle D-480 Operating Instructions Manual

SELECTING A TAPE LENGTH
Select the corresponding tape length according to the loaded tape.
Example : In case of 60 minute tape.
Each time this button is pressed, the tape length changes as follows;
C-60 → C-90 → C120
→
During playback or recording, the elapsed recording or playback time are displayed.
The time counter is not actually a clock so that the displayed time is not exactly equal to the actual elapsed time.
RESETTING TO "0000" OR "00 min. 00 sec."
In each counter mode, press the COUNTER RESET button to reset to "0000" or "00 min. 00 sec".
Example : In the tape counter mode.

MEMORIZING THE SPECIFIC POINT

Press the MEMORY button to memorize the desired counter number or time.
The unit will automatically returns to the memorized position when the FAST FORWARD or REWIND button is
pressed.
This function is helpful to listen to the desired intervals repeatedly.
Press again to cancel.
RESET
MEMORY
B C
HIGH NORM
CD SYN MPX
REC
L
dB -00 -20 -10
R
15
TAPE SIZE
B C
HIGH NORM
CD SYN MPX
REC
L
dB -00 -20 -10
R
B C
HIGH NORM
CD SYN MPX
REC
L
dB -00 -20 -10
R
M
RELAY P
MIN SEC
REC
-6 -3 0 +3 +6
M
RELAY P
MIN SEC
REC
-6 -3 0 +3 +6
M
RELAY P
MIN SEC
REC
-6 -3 0 +3 +6