Table of Contents
Advertisement
2. Operating elements and lights
4. Information display
7. Childproof button
1. ON/OFF button:
The main switch to turn the heater on and off. Switch
it "ON" to activate the heater. Combustion will start
after a 2-6 minutes pre-heating period. The heater has
4 settings "HIGH", "MEDIUM", "LOW" and "OFF".
2. Adjustment buttons:
Temperature selection switches offer the user the option
to select the desired temperature during operation.
3. Information display:
Displays the clock, set temperature, room temperature
and error codes.
4. Heat adjusting slide knob
・ Manual operation ...
Slide the heat adjusting slide knob to right-side to
select your desired heat yield from "LOW" to "HIGH".
・ Automatic operation ...
Set the heat adjusting slide knob to left-side "Auto"
position to set the Automatic operation. The heater
will operate automatically in accordance with the set
and room temperature.
5
2. Adjustment buttons
8. Filter button
6. Timer button
Fig. D-1 Operation panel
5. SAVE button:
Allows you to limit the temperature. When this function
is activated, the heater will automatically switch off
and on again.
6. TIMER button:
Allows you to switch on the heater automatically at a
preset time.
7. CHILDPROOF LOCK button:
Can be used to prevent children accidentally changing
the heater settings.
8. Filter button:
This button is for releasing the filter lamp.
・ To release the filter lamp
When the filter lamp is on, please clean the fan filter
(See pages 10). After cleaning, please keep pressing
the filter button for more than 3 seconds. Then the
filter lamp will be off.
1. ON/OFF button
5. Save button
3. Heat adjusting slide knob
Advertisement
Table of Contents
