Table of Contents
Advertisement
4. Wiring for the room temperature sensor
A temperature sensor that can be fitted to a wall
measures
the
room
temperature
automatically regulate the heating. The standard
sensor wire is approximately 2.5 m long.
The sensor may not be placed in a draught,
direct sunlight or the warm air flowing out of
the heater. This may cause incorrect
temperature indications.
More than 30 cm
5. Unpacking
Save all packaging materials for possible future
in
order
to
transportation.
A) Remove the cardboard (drilling) template and the
user's manual from the packaging.
B ) Remove the drip tray from the packaging.
C ) Remove the box with the installation kit from the
packaging.
D ) Remove the heater from the packaging.
E ) Remove the plastic bag containing the parts.
F ) Remove the exhaust pipe from the bottom of the
box.
G ) Check that all parts are present.
More than 60 cm
More than 1.5 m
FR-700F
Fig. 1: Gaps heater/exhaust pipe
Only the standard feed and exhaust system
is supplied with the heater.
More than 10 cm
More than 30 cm
12
Advertisement
Table of Contents
