Features; Assembly; Operation - Ryobi P601 Operator's Manual

PRODUCT SPECIFICATIONS
Switch ............................................................. Single Speed
No Load Speed ................................................29,000 RPM
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
or with damaged or missing parts could result in serious
personal injury.
If any parts are damaged or missing, please call 1-800-525-2579 for assistance.
WARNING:
Do not allow familiarity with this product to make you
careless. Remember that a careless fraction of a second
is sufficient to inflict serious injury.
WARNING:
Always remove battery pack from the tool when you are
assembling parts, making adjustments, cleaning, or when
not in use. Removing battery pack will prevent accidental
starting that could cause serious personal injury.
WARNING:
Always wear eye protection with side shields marked to
comply with ANSI Z87.1, along with hearing protection.
Failure to do so could result in objects being thrown into
your eyes and other possible serious injuries.
WARNING:
Do not use any attachments or accessories not
recommended by the manufacturer of this tool. The use
of attachments or accessories not recommended can
result in serious personal injury.

FEATURES

Collet Size ................................................................. 1/4 in.

ASSEMBLY

WARNING:
Do not attempt to modify this product or create
accessories or attachments not recommended for use
with this product. Any such alteration or modification is
misuse and could result in a hazardous condition leading
to possible serious personal injury.

OPERATION

APPLICATIONS
You may use this tool for the following purposes:
 Smooth, professional trimming of laminates, wood and
wood veneer
INSTALLING/REMOVING BATTERY PACK
See Figure 1, page 10.
 Set the switch in the OFF position.
 Insert the battery pack into the product as shown.
 Make sure the latches on each side of the battery pack
snap in place and that battery pack is secured in the
product before beginning operation.
 Depress the latches to remove the battery pack.
For complete charging instructions, see the operator's
manuals for your battery pack and charger.
WARNING:
Battery tools are always in operating condition. Turn the
switch OFF when not in use or carrying at your side,
when installing or removing the battery pack, and when
installing or removing bits. Failure to turn off the switch
could result in unexpected starting and serious personal
injury.
STARTING/STOPPING THE ROUTER
See Figure 2, page 10.
To turn the router ON, slide the switch on front of the router
to the ON position.
Return the switch to the OFF position when finished.
5 — English