System Connections; Fm/Am Loop Aerial Socket; 34. Speaker Terminals; Ac Power Lead - Sharp XL-MP10H Operation Manual

System connections

XL-MP10H
ENGLISH
Make sure to unplug the AC power lead
before making any connections.
AM loop aerial
Right speaker
Wall socket
(AC 230 V, 50 Hz)
E-5
! Aerial connection
Connect the FM/AM loop aerial to the ANTENNA socket.
Position the FM aerial wire and rotate the AM loop aerial for opti-
mum reception. Place the AM loop aerial on a shelf, or attach it to a
stand or a wall.
Notes:
FM aerial
" Placing the aerial on the unit or near the AC power lead may
cause noise pickup. Place the aerial away from the unit for better
reception.
" Do not connect the attached FM aerial to an external aerial as
this may cause trouble.
Left speaker
Installing the AM loop aerial:
< Assembling >
! Speaker connection
Connect the wire with the white line to the minus (-) terminal and the
plain wire to the plus (+) terminal.
Caution:
" Do not let the bare speaker wires touch each
other.
" Use speakers with an impedance of 4 ohms or
more, as lower impedance speakers can damage
the unit.
" Do not mistake the right and the left channels.
The right speaker is the one on the right side
when you face the unit.
White line
Plain
Placing the speaker system:
There is no distinction between the right and the left speakers.
04/11/1
< Attaching to the wall >
Wall Screws (not supplied)
Incorrect
XL-MP10H(H)E1.fm
TINSZA033SJZZ