Listening To A Cd Or Mp3/Wma Disc - Sharp XL-DH229 Operation Manual

Listening to the iPod or iPhone
(continued)
Navigating the iPod and iPhone menus
1
Press the MENU button to view the menu on iPod or iPhone
unit. Press it again to go back to previous menu.
2
Use the PRESET ( or
menu and then press ENTER button.
Note:
When navigating the iPod or iPhone menu with remote control,
do not operate any of the buttons on the iPod or iPhone unit. The
volume level is adjusted by pressing the VOL (+ or -) button on
the main unit or the remote control. Adjusting the volume on the
iPod and iPhone units give no effect.
iPod and iPhone operations:
The operations described below depend on the generation iPod
and iPhone you are using.
System on operation:
When the main unit is powered on, the iPod and iPhone units will
automatically power on when docked in the unit.
System off (stand-by operation):
When the main unit is turned to stand-by mode, the docked iPod
and iPhone unit will automatically turn to stand-by mode.
Watching videos on a TV connected to iPod
or iPhone
1
Press the DISPLAY (TV OUT) button for more than 2
seconds. "TV DISP" will appear on display.
2
Press the ENTER button to start playback.
Notes:
If the TV Out setting is already turned on at video menu,
the video is automatically displayed on the TV screen when
ENTER key is pressed.
To return to watching video on iPod or iPhone screen, press
the MENU button to enter video menu. Then press the
DISPLAY (TV OUT) button for more than 2 seconds until
"iPod DISP" appears.
During iPod or iPhone video playback, pressing the DISPLAY
(TV OUT) button will not toggle video out display between
iPod and TV.
iPod or iPhone playback detection function:
Once the play button on the iPod or iPhone unit is pressed,
the main unit will automatically change to iPod function
overriding the previous function selected.
Caution:
Unplug all accessories for the iPod or iPhone before inserting
it into the iPod dock.
Stop button ( ) at main unit is invalid during iPod function.
) button to select an item on the
Various iPod functions
Main
Function
unit
Play
Pause
Track
up/down
____
Fast
forward/
____
reverse
Display
____
Repeat
____
Shuffl e
____
iPod
____
Menu
iPod
____
Enter
iPod
Cursor
____
Up/Down

Listening to a CD or MP3/WMA disc

Disc playback
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD button on the remote control or
FUNCTION button repeatedly on the main unit to
select CD function.
3
Press the OPEN/CLOSE button to open the disc tray.
4
Place the disc on the disc tray, label side up.
5
Press the OPEN/CLOSE button to close the disc tray.
6
Press the (CD/USB
After the last track is played, the unit will stop
automatically.
Notes for CD or MP3/WMA disc:
When the end of the last track is reached during fast
forward, "END" will appear on the display and CD
operation will be paused. When the beginning of the
fi rst track is reached during fast reverse, the unit will
enter the playback mode (only for CD).
Rewritable multi-session discs with unfi nished writing,
can still be played.
E-7
Remote
Operation
control
Press in the pause
mode.
Press in the playback
mode.
Press in the playback
or pause mode. If you
press the button in the
pause mode, press the
button to start the
desired track.
Press and hold down in
the playback mode.
Release the button to
resume playback.
iPod back light ON.
Press for more than
2 seconds to toggle
the video out display
between iPod or TV.
Press to toggle repeat
mode.
Press and hold down to
toggle shuffl e mode.
Press to view the iPod
menu during iPod
function.
Press to confi rm the
selection.
Press to select the iPod
menu.
) button to start playback.