Dispensing Hot Water - Saeco PicoBaristo Deluxe User Manual

English
10
8 After brewing milk-based drinks, the display asks you if you want to perform the quick clean
procedure for the milk carafe. You have 10 seconds to activate the QUICK MILK CLEAN program
(see 'Milk carafe cleaning programs'). You can perform the quick clean procedure while leaving the
milk inside the milk container. It is recommended to perform the quick clean procedure at least
once a day. Press the OK button to confirm that you want to perform the quick clean procedure or
press the 'back' icon to perform the quick clean procedure later.
Brewing coffee with pre-ground coffee
1 Open the lid and pour one measuring scoop of pre-ground coffee into the pre-ground coffee
compartment. Then close the lid (Fig. 9).
2 Use the up and down arrows to select pre-ground coffee (Fig. 10). Tap the OK button if you want to
adjust the settings. Then press the start/stop
Note: If you select ground-coffee, you cannot adjust the coffee strength and brew more than one
drink at the same time.

Dispensing hot water

1 Insert the hot water dispensing spout.
2 Press the one-touch 'Hot water' icon (Fig. 11).
3 Press the start/stop
Personalizing drinks and creating profiles
This machine allows you to adjust the settings of a drink to your own preference and to save the
adjusted drink in a personal profile. The different profiles have different colours and are either ACTIVE
or NEW. An ACTIVE profile already contains customized drinks. A NEW profile does not contain
customized drinks yet. The white SAECO profile is the default profile. There are two ways to create a
profile:
1 When brewing a drink: Press the OK icon to adjust the settings of the selected drink. After adjusting
all settings, tap the OK icon to save the personalized drink to a profile. Note that the personalized
drink will be saved in the profile you are in, unless you are in the Saeco profile. In that case, you can
choose the profile in which you want to save the personalized drink (either in an ACTIVE profile or a
NEW profile).
2 Via the 'Profiles' menu: Select a profile and then personalize the drinks one by one.
Personalizing your drinks
You can adjust the settings to your own preference:
1 Tap one of the one-touch drink icons or tap the '7 more drinks' icon to select your preferred drink
(Fig. 6).
2 Use the up and down down arrows (Fig. 7) to adjust the coffee strength. Tap the OK button if you
want to adjust more settings. The screen shows the settings you can adjust to your preference.
Depending on the type of drink, you can adjust strength, volume of coffee, milk and water,
temperature and taste.
3 Use the up and down arrows to set your preferred level (Fig. 7) and tap the OK icon to confirm.
Depending on the type of drink, the next adjustable setting appears on the screen.
4 After customizing all settings, tap the OK icon to save these settings to your profile (Fig. 12).
button to start dispensing hot water.
button.