Technical Specifications - Saeco PicoBaristo Deluxe User Manual

English
20
Problem
I cannot activate the
AquaClean filter and the
machine asks for
descaling.
The new water filter does
not fit.
The machine is making a
noise.
The machine does not
respond when I tap one
of the icons or buttons
on the control panel.

Technical specifications

The manufacturer reserves the right to improve the technical specifications of the product. All the
preset quantities are approximate.
Description
Size (w x h x d)
Weight
Power cord length
Water tank
Coffee bean hopper capacity
Coffee grounds container capacity
Milk carafe capacity
Adjustable spout height
Nominal voltage - Power rating - Power supply
Cause
The filter has not been replaced
in time after the AquaClean
filter icon flashed and the
capacity dropped to 0%.
You did not install the
AquaClean filter during first
installation, but after having
brewed approx. 25 coffees
(based on 100ml cups). The
machine has to be completely
limescale-free before you
install the AquaClean filter.
You are trying to install another
filter than the AquaClean filter.
It is normal that your machine
makes noise during use.
You are touching the control
panel with wet hands.
Solution
Descale your machine first and then
install the AquaClean filter.
First descale the machine and then
install a new AquaClean filter. After
descaling, the filter counter is reset to
0/8. Always confirm filter activation in
the machine menu. Also do this after
filter replacement.
Only the AquaClean filter fits into the
machine.
If the machine starts to make a different
kind of noise, clean the brew group and
lubricate it (see 'Lubricating the brew
group').
Make sure that your hands are dry when
you touch the icons or buttons on the
control panel.
Value
222 x 335 x 436 mm
10 - 11 kg
1200 mm
1.8 litres, removable
250 g
15 pucks
550 ml
81-106 mm
See data plate on inside of service door