Tape Playback; Listening To A Cassette Tape (Tape 1 Or Tape 2); Tape Play Indicator - Sharp CD-ES600 Operation Manual

Listening to a cassette tape (TAPE 1 or TAPE 2)

Before playback:
" For playback, use normal or low-noise tapes for the
best sound. (Metal or CrO tapes are not recom-
mended.)
" Do not use C-120 tapes or poor-quality tapes, as
they may cause malfunctions.
" Before loading a tape into the cassette compartment,
tighten the slack with a pen or a pencil.

! Tape playback

1
Press the ON/STAND-BY button to turn the power on.
2
Open the cassette com-
partment by pushing the
area marked " ".
3
Load a cassette into the
TAPE 1 compartment or
TAPE 2 compartment with
the side to be played fac-
ing towards you.
4
Press the TAPE (1 2) button to select the cassette you
want to listen to.
5
Press the / to start
playback.
Auto power on function:
When you press any of the following buttons, the unit turns on.
" TAPE (1
2) button (main unit and remote control): The unit
turns on and the "TAPE" function is activated.
"
/ button (main unit and remote control): The unit turns on
and playback of the last function starts (CD/TAPE/TUNER/
GAME).
CD-ES600
CD-ES66
TAPE 1 TAPE 2

Tape play indicator

23