Sharp CD-ES600 Operation Manual page 33

! Cassette deck
Symptom
" Cannot record. " Is the erase-prevention tab re-
" Cannot record tracks with " Is it a normal tape? (You cannot
proper sound quality.
" Cannot erase completely.
" Sound skipping. " Is there any slack?
" Is the tape stretched?
" Cannot hear treble. " Are the capstans, pinch rollers,
" Sound fluctuation.
" Cannot remove the tape. " If a power failure occurs during
! Remote control
Symptom
" The remote control does " Is the AC power cord of the unit
not operate.
" Is the battery polarity correct?
" Are the batteries dead?
" Is the distance or angle incor-
" Does the remote control sensor
Possible cause
moved?
record on a metal or CrO tape.)
or heads dirty?
playback, the heads remain en-
gaged with the tape. Do not open
the compartment with great
force.
Possible cause
plugged in?
rect?
receive strong light?
! Tuner
Symptom
" The radio makes unusual " Is the unit placed near the TV or
noises continuously.
" Is the FM antenna or AM loop an-
! If trouble occurs
When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it may
malfunction.
If such a problem occurs, do the following:
1 Set the unit to the stand-by mode and turn the power on again.
2 If the unit is not restored in the previous operation, unplug and
plug in the unit, and then turn the power on.
Note:
If neither operation above restores the unit, clear all the memory by
resetting it.
! Clearing all the memory (reset)
1 Press the ON/STAND-BY button to enter the power stand-by
mode.
2 While pressing down the
ton, press the PRESET
appears.
Caution:
This operation will erase all data stored in memory including clock,
timer settings, tuner preset, and CD program.
Possible cause
computer?
tenna placed properly? Move the
antenna away from the AC power
cord if it's located nearby.
button and the X-BASS/DEMO but-
button until "CLEAR AL"
CD-ES600
CD-ES66
33