Cleaning The Ventilative Holes - Sharp XV-Z10000 Operation Manual

Cleaning the Ventilative Holes

• This projector is equipped with
ventilative holes to ensure the opti-
mal operating condition of the projec-
tor.
• Periodically clean the ventilative hole
by vacuuming it off with a vacuum
cleaner.
• The ventilative holes should be
cleaned every 100 hours of use. Clean
the ventilative holes more often when
the projector is used in a dirty or
smoky location.
Cleaning the
Ventilative Holes
1
Turn off the power and discon-
nect the power cord.
Press . Wait until the cooling fan
stops.
2
Unplug the Power Cord.
3
Clean the dust off by putting
the cleaner hose on the intake
ventilative holes.
Side and Rear view
Ventilative
holes
Power
(OFF)
button
Cleaner
hose
Bottom view
Ventilative
holes
Power
(OFF)
button
Cleaner
hose
-73