Selecting Adjustment Settings; Special Mode Settings - Sharp XV-Z10000 Operation Manual

Selecting Adjustment Settings

Adjustment settings stored in the projector
can be easily accessed.
Select "Select Setting" in the "Fine
Sync" menu on the menu screen.
➝For operating the menu screen, see
pages 40 to 43.
Note
If a memory position has not been set, a
resolution and frequency setting will not
be displayed.
When selecting a stored adjustment set-
ting with "Select Setting", you can set the
projector in the stored adjustments.

Special Mode Settings

Ordinarily, the type of input signal is detected
and the correct resolution mode is automati-
cally selected. However, for some signals, the
optimal resolution mode in "Special Modes" on
the "Fine Sync" menu screen may need to be
selected to match the computer display mode.
Set the resolution by selecting "Special
Modes" in the "Fine Sync" menu on the
menu screen.
➝For operating the menu screen, see
pages 40 to 43.
Note
Avoid displaying computer patterns which
repeat every other line (horizontal stripes).
(Flickering may occur, making the image
hard to see.)
When a DVD player or Digital Video is con-
nected, select 480P as the input signal.
See "Checking the Input Signal" below for
information on the currently selected input
signal.
-54