Maintaining The Brushroll; Maintaining The Soft Roller; Checking For Blockages - Shark Rocket HV384Q Series Instructions Manual

MAINTAINING YOUR VACUUM - CONT�
WARNING: Do not cut
anything but the hair,
fibers or string that is
wrapped around the
brushroll�
TIP: Ensure the brushroll
garage is completely
sealed and closed before
using.
NOTE: Heavy usage
over time may require
minimal upkeep in order
to maintain your vacuum's
appearance.

MAINTAINING THE BRUSHROLL

1 Press down on the two
buttons on the floor nozzle
to pop up the brushroll
garage lid.
2 Lift the brushroll out by
the tab on the left side. To
remove any string, hair or
debris that may be wrapped
around the brushroll, use
the onboard hair removal
tool. The tool is located in a
compartment on the nozzle,
above the brushroll.
19
1-800-798-7398
STEP 1 STEP 2
3 To reinstall the brushroll,
return it to the brushroll
garage. Press down on the
brushroll garage lid until you
hear it click into place.

MAINTAINING THE SOFT ROLLER

1 Slide the Soft Roller access button up to
remove the Soft Roller.
2 Use the onboard hair removal tool to
remove any string, carpet fibers or hair that
may be wrapped around the Soft Roller.
The tool is located in a compartment on the
nozzle, above the brushroll. You can also
tap loose debris off the Soft Roller, or wipe it
clean with a dry towel. If you see any fibers
or hair buildup in the teeth behind the Soft
Roller, take a dry towel and wipe it away.
3 Wash the Soft Roller as needed. Use only
water, and let air-dry completely for at least
24 hours.
4 Reinsert the Soft Roller by sliding it into the
front of the nozzle until it clicks into place.

CHECKING FOR BLOCKAGES:

HANDHELD, WAND, AND FLOOR NOZZLE
1
Remove the wand from the handheld
portion and check all dust cup intake
openings.
2 Remove the floor nozzle from the wand
and check the wand for blockages.
3
Tilt neck of floor nozzle back to straighten
the airway. Remove blockages.
s h a r kc l e a n . c o m
20