User Interface Menu Control - Wyse Winterm 3000 Series User Manual

User Interface Menu Control

Table 2 describes the command buttons used for user interface menu control on a 3000
Series WBT.
Table 2 User Interface Menu Control
Command Button
X
OK
Cancel
Apply
Next or Accept
Back
Finish
Function
Found in the upper right corner of a dialog box. Click on this
command button to quit a dialog box or properties sheet
without saving changes.
Found in dialog boxes and on properties sheets. Click on this
command button to save your changes and quit a dialog box
or properties sheet.
Found in dialog boxes and on properties sheets. Click on this
command button at any time to quit a dialog box or properties
sheet without saving changes.
Found in dialog boxes and on properties sheets. Click on this
command button to save changes without quitting a dialog
box or properties sheet. This command button is sometimes
not activated.
Found in wizards. Click on these command buttons to display
the next dialog box in the sequence.
Found in wizards. Click on this command button to return to
the previous dialog box.
Found in wizards. Click on this command button to finish the
wizard.
3