Displaying The Black Screen And Turning Off The Sound Temporarily; Correcting Trapezoidal Distortion - Sharp Notevision PG-B10S Operation Manual

Image Projection
Displaying the Black
Screen and Turning off
the Sound Temporarily
Press on the remote control to
temporarily display a black screen
and turn off the sound.
Note
Pressing again will turn the projected
image and sound back on.
Correcting Trapezoidal
Distortion
When the image is projected either from the top
or from the bottom towards the screen at an
angle, the image becomes distorted trapezoidally.
The function for correcting trapezoidal distortion
is called Keystone Correction.
Note
The Keystone Correction can be adjusted
up to an angle of approximately ±35 degrees
and the screen can also be set up to an
angle of approximately ±35 degrees (when
the resize mode is set to "NORMAL" (see
page 26)).
The Keystone Correction cannot be ad-
justed in the lateral direction.
1
Press
stone Correction mode.
You can also use
-20
to enter the Key-
on the projector.
KEYSTONE
button
UNDO
button
"On-screen display (Keystone Correction mode)
AV MUTE button
' " \ |
, , ,
buttons